Hey everyone I am looking for some help. I have a CT supercharger kit with a 1200 blower on hold right now. My goal is to make 420+ whp. I contacted SOS to purchase smaller pulleys only to find out that their pulleys are not compatible with the 1200 blower that CT uses. I thought the blowers were the same but apparently not. Anyway is there anyone out that knows where I might be able to purchase some smaller pulleys that will be compatible to my setup so I can hit my horsepower goal? I really appreciate any responses!


Greg

 

To be clear the blower is the same. The mounting system is different and so Im told the offset of the SOS pulleys will not fit on the CT mount

I know there is a guy in NJ who has 460 on CT 1200 kit so they are out there. We need to know where to source smaller pulleys for CT 1200 kit.

 

Anyone???

 

Hmm what's different about the supercharger faceplate that makes the Comptech different from their "12 series upgrade plate"?

Is the Comptech plate too thick or thin?

I'm just curious I suppose.

 

I have SOS pulleys on my Comptech 1220 kit... but I think the previous owner bought the 1220 upgrade kit from SOS which explains why its compatible with SOS pulleys.

 

Talked to CT and they had me ship an SOS pulley I bought to them. They are going to put in on and then send the kit out to me. Hopefully everything works out so I can have this thing on and tuned by MDW!

 

did anyone figure this out???? Im stuck and want to send CT a sos pulley but they wont answer the phone... and sos doesnt know what would be needed to make it fit

 

I called CT just the other day at got someone first try! I don't understand why people have trouble getting a hold of them? Every time I've called them or SOS they have either answered or called me back same day.

 

Tap the holes near the pulley so they are tapered and use new tapered screws.

 

was going to do this....... will the sos pulley fit at this point????
My main concern is the OFFSET.... is the offset correct to fit on the CT plate???