Ok guys im planning on going boost and this is pretty much the main parts im going to be using on my custom setup, my goal is simply to hit 350whp at around 9psi

I daily my car and im looking to maintain high reliability on my AP1

what do you guys think of this setup? ALL info is appreciated
especially info from those guys who are already boost
should I be expecting any probs with this setup? how is reliability ?

TIAL 38mm Wastegate
TIAL B.O.V.
SC3431 Precision Turbo
Oil Filter Relocation Kit
Oil feed & Return Line for turbo
Mishimoto 24.5" X 11.75" X 3" Intercooler
Fuel Injector Clinic 900cc injectors l
Tubular Top Mount Manifold (Peakboost)
AEM EMS 1052

 

Go with pfab, inline, or full blown for your manifold. Don't think peak is still around.

 

really? i had a link to one of their manifolds

 

Go with the whole full blown stage 1 kit. Will get you to 350 no prob and cheap as hell.

 

how much is it?

 

You could go custom but for 350 you don't need a tubular manifold. Just get a log manifold kit from inline, full blown, pfab, etc.

 

Personally on an s2k, I wouldn't get less than a 44mm gate to prevent boost creep.

 

whats boost creep?

 

its when the pressure of boost per psi raises higher than what you originally limit it at

 

In Layman's terms yes.

Read about boost creap, and you'll understand why having a bigger gate is never a bad thing.