S2000 Forced Induction S2000 Turbocharging and S2000 supercharging, for that extra kick.

options for engine management on S/C S2's

Thread Tools
 
Old Feb 27, 2008 | 05:56 PM
  #1  
samus143's Avatar
Thread Starter
Registered User
 
Joined: Aug 2006
Posts: 168
Likes: 0
From: Boston, MA
Default options for engine management on S/C S2's

Hi guys, I'm new to boosted s2000's, I've done my homework and have shopped around for fuel delivery options but I could not find the answers I am looking for. I will be running a comptech supercharger on the f20c at 5psi with an intercooler. The kit I have is missing the fuel pump, ESM and FPR, can you guy's help me with these questions, thanks in advance!

#1 Will 550cc injectors be able to idle like stock injectors and pass emissions or are they overkill for 5 psi? I'm from Massachusetts.

#2 How many can vouch for Giles, and how can I get in contact with him to tune my car after I have the supercharger installed, injectors etc. Does he have a website/shop?

#3 Does anyone have experience with the AEM F/I controller, and is the E-Manage ultimate a better piggyback than the AEM F/I unit?

Again thank you in advance,
Sam
Reply
Old Feb 27, 2008 | 08:59 PM
  #2  
Enthralled's Avatar
Registered User
 
Joined: Nov 2005
Posts: 14,373
Likes: 0
From: Los Angeles, CA
Default

#1 the stock injectors can handle the 7psi no problem.

#2 Iono who Giles is..

#3 I don't know anything about the AEM unit you are talking about, but i do have the Emanage Ultimate and have no issues with it.
Reply
Old Feb 28, 2008 | 03:09 AM
  #3  
sparrow's Avatar
Registered User
 
Joined: Mar 2007
Posts: 7,899
Likes: 1
Default

2: Giles is well respected in your area...if you don't know who he is then that would suggest you don't interact in your area much

3: If Giles will be tuning the car he is very proficient with the emanage so i would use that
Reply
Old Feb 28, 2008 | 07:48 AM
  #4  
CourageOO7's Avatar
Registered User
 
Joined: Aug 2003
Posts: 3,170
Likes: 0
From: SLC, UT
Default

I'm running an AEM EMS on my Comptech setup.
Reply
Old Feb 28, 2008 | 02:16 PM
  #5  
samus143's Avatar
Thread Starter
Registered User
 
Joined: Aug 2006
Posts: 168
Likes: 0
From: Boston, MA
Default

I was leaning towards the E-manage ultimate and I have heard great things about them so I will get one ASAP, and I found out about Giles through the Northeast forums but I think his shop is about 3 hours away from where I live so it will be a good road trip for me. Thank you all for your help.
Reply
Old Feb 29, 2008 | 10:45 AM
  #6  
chairmnofthboard's Avatar
 
Joined: Jan 2006
Posts: 16,548
Likes: 1
Default

Originally Posted by Enthralled,Feb 27 2008, 09:59 PM
#1 the stock injectors can handle the 7psi no problem.

#2 Iono who Giles is..

#3 I don't know anything about the AEM unit you are talking about, but i do have the Emanage Ultimate and have no issues with it.
He has an AP1, the Injectors won't hold 7psi to 9k.
Reply
Old Feb 29, 2008 | 10:57 AM
  #7  
Enthralled's Avatar
Registered User
 
Joined: Nov 2005
Posts: 14,373
Likes: 0
From: Los Angeles, CA
Default

Originally Posted by chairmnofthboard,Feb 29 2008, 11:45 AM
He has an AP1, the Injectors won't hold 7psi to 9k.
the stock Vortech comes with 7psi...even for the AP1's....whats the difference? Am i missing something...
Reply

Trending Topics

Old Feb 29, 2008 | 10:58 AM
  #8  
devs2k's Avatar
 
Joined: Apr 2006
Posts: 7,852
Likes: 0
From: Clifton, NJ
Default

I can vouch for Giles.

pm him on the forum "gilbertg"
Reply
Old Feb 29, 2008 | 02:23 PM
  #9  
9kFever's Avatar
Former Moderator
 
Joined: Mar 2004
Posts: 4,686
Likes: 0
From: Yorba Linda, CA
Default

Originally Posted by chairmnofthboard,Feb 29 2008, 11:45 AM
He has an AP1, the Injectors won't hold 7psi to 9k.
if you recalibrate the FMU they will.
Reply
Old Feb 29, 2008 | 02:59 PM
  #10  
chairmnofthboard's Avatar
 
Joined: Jan 2006
Posts: 16,548
Likes: 1
Default

Originally Posted by 9kFever,Feb 29 2008, 03:23 PM
if you recalibrate the FMU they will.
Bandaid
Reply



All times are GMT -8. The time now is 09:34 AM.