I've tried a search with no luck.. Anyone know where i can get a set of plug and play clips for RC750 injectors?

thx

 

You can just order them straight from RC http://rceng.com/

 

Also, Science Of Speed has them. They run 67 plus shipping for a set of 4.

http://www.scienceofspeed.com/products/eng...RC_Engineering/

 

Just pull the insides of your stock clips out. There is a DIY on that running around somewhere.

 

Or go to the pick and pull in your area and jack some clips from a 92-95 honda and wallah! Remember, walk out with them in your pocket! lol

 

thanks guys

i've had no luck with RC and they won't ship to me

I've also tried the injector clip mod but it doesn't line up, unless i shave a bit of the plastic notch of the injector off, something i'd do as a last resort...

dalink, can i just pull off any 92-95 injector clip off? and if i do decide to go stock again, would my oem injectors plug right in again or would i have to splice again?

thx for all the help

 

you can pull off the rubber from the OEM injector clip and Plug right into RC injectors;However,It will not Click for locking,but you can use the small wrap ties for tighten.
This was posted from a member about 4 months ago.

 

Do you have the standard RC pigtails or no plugs at all?

 

 

^^ Ding Ding Ding