chilicoke: side diffusers
 

i was pm'ing chilicoke about four months ago to see if/when he'd put those infamous side diffusers he custom made for his s2000 up for sale and i was just so happening to be just inquisitively dropping by his site and there they were, ready for distribution. i immediately pm'd him and setup a paypal transaction. he shipped them out on monday and i received them on friday (california to florida).


so, here it was, straight out of the box, no damage of course, beautiful...
http://i29.tinypic.com/33vln5k.jpg




here is the mounting hardware, self-tapping screws and fender washers, also included was incredibly detailed instructions with pictures (even the novice could install these)...
http://i30.tinypic.com/2jbrudf.jpg

of course the brand name "chilicoke" logo, as desirable as any JDM company...
http://i25.tinypic.com/1sktxj.jpg

now to the install, basically all i had to do was jack up the front, put a jackstand there, lower it down, and then use the jack to hold up the rear. hold up the side diffuser, use a paintpen to mark the holes for drilling (7/64" drill bit), drill it out, temp install all the screws, and then tighten them down.

http://i31.tinypic.com/o7rhba.jpg

http://i26.tinypic.com/25tcnqb.jpg

http://i28.tinypic.com/339kox0.jpg

i need to get these asap too!

and finally, the fully installed pics, getting the car out of the garage for a further back perspective (yeah my pic angles and camera suck)...

http://i28.tinypic.com/2ngrdig.jpg

http://i32.tinypic.com/28suiop.jpg

http://i27.tinypic.com/2zri83d.jpg

http://i32.tinypic.com/2mmweuv.jpg

http://i30.tinypic.com/2r70g1k.jpg

get it and our cars will almost be twins!
:D

:thumbup: for Chili!

Those look sharp. Really digging the semi-gloss finish. Are they fiberglass?

Do you know if they fit with Side stakes on?

they are black gel coat (fiberglass reinforcement) with a matte black paint job. clearance is decently tight, so i don't think the side strakes will fit.