J's Carbon Fiber Intake and J's Engine Damper
Registered User
Joined: Aug 2001
Posts: 9,214
Likes: 2
From: West Coast
Originally Posted by shaolin,Sep 30 2005, 09:24 AM
looks good.
does the torque damper have to use on the j's struct bar?
does the torque damper have to use on the j's struct bar?
They do sell them seperately and if you dont plan on running a STB than you can just buy the ETD and it comes with a bracket but if you plan on using any other STB than the Js then you may run into some problems. Not to sure if its safe either being that you will have a very few threads due to the thickness of your aftermarket STB plate and the Js ETD plate. I ran the Spoon STB with the Js ETD but there was simply not enough threads left to run safely so I swapped it out for a Js STB/ETD combo.
Just some information for you guys. When I did run the Spoon STB I actually had to flip over the nut to get the amount of threads I wanted to deem it safe.
Registered User
Joined: Aug 2003
Posts: 8,362
Likes: 0
From: Irvine
Originally Posted by JsAP1,Sep 30 2005, 12:42 PM
To use this correctly you should use the Js STB/ETD combo. One side of the Js STB has the extension so the ETD bolts up easily.
They do sell them seperately and if you dont plan on running a STB than you can just buy the ETD and it comes with a bracket but if you plan on using any other STB than the Js then you may run into some problems. Not to sure if its safe either being that you will have a very few threads due to the thickness of your aftermarket STB plate and the Js ETD plate. I ran the Spoon STB with the Js ETD but there was simply not enough threads left to run safely so I swapped it out for a Js STB/ETD combo.
Just some information for you guys. When I did run the Spoon STB I actually had to flip over the nut to get the amount of threads I wanted to deem it safe.
They do sell them seperately and if you dont plan on running a STB than you can just buy the ETD and it comes with a bracket but if you plan on using any other STB than the Js then you may run into some problems. Not to sure if its safe either being that you will have a very few threads due to the thickness of your aftermarket STB plate and the Js ETD plate. I ran the Spoon STB with the Js ETD but there was simply not enough threads left to run safely so I swapped it out for a Js STB/ETD combo.
Just some information for you guys. When I did run the Spoon STB I actually had to flip over the nut to get the amount of threads I wanted to deem it safe.
good tips.
does struct really help?? i don't see amuse s2k use it.
Thread Starter
Registered User
Joined: Jul 2005
Posts: 171
Likes: 0
meth - the grll is called GrillCraft www.grillcraft.com part# HON-1162 B (i think B stands for Black), this is for the 04 and the 05 model only. I hope this helped.
Thread
Thread Starter
Forum
Replies
Last Post
N1Concepts
Sponsor S2000 Engine and S2000 Drivetrain Deals
20
Jul 8, 2008 07:50 PM