My TracySports project
Thread Starter
Registered User
Joined: Mar 2006
Posts: 483
Likes: 0
From: Baltimore, MD
Originally Posted by medicalstudent,Apr 25 2007, 08:40 AM
Sweet! Do you know if you could custom-program the redline? If my next project gets off the ground, I'll need something that reads a redline between 13-15k rpms 
That's the upper limit of the dash 
I just have it set for 10K now, the car starts to loose power around 9.8K
Chris
Thread Starter
Registered User
Joined: Mar 2006
Posts: 483
Likes: 0
From: Baltimore, MD
OK, so some quick updates and pictures.
The car will be receiving the third and last blocking before paint this week. I am learning that "race" fiberglass is some wavy stuff
The TC design rear bump steer kit was installed, and the new adjustable upper ball joints arrived (ordered one for all four corners). This will let me adjust camber to +/- 3 degrees. I also received my Inline fuel rail.
(Checking the body lines)
(sorry about the dust )
(I know, the front bumper is just on there...)
-Chris
The car will be receiving the third and last blocking before paint this week. I am learning that "race" fiberglass is some wavy stuff
The TC design rear bump steer kit was installed, and the new adjustable upper ball joints arrived (ordered one for all four corners). This will let me adjust camber to +/- 3 degrees. I also received my Inline fuel rail.
(Checking the body lines)
(sorry about the dust
)(I know, the front bumper is just on there...)
-Chris
