i love the fender work and it looks like your enkei has more lip in the rear

what is the offset and size?

 

mines 17x9+45 all around, i also run a 3mm spacer in the rear though.

 

if i run 17x8 +45 front and 17x9 +45 rear with a 1inch (eibach prokit) will the fronts rub with a 225 with rolling the fronts, i know i have to roll the rears.

or will it rub front with a 17x8 with a 215?

 

holy rock chips!!!

 

Holly Swirls. lol

 

haha I thought that was a cf front lip at first

 

New look for the RPF1's

 

loving the wheels guys.... i think its time for me to go ahead and finally paint mine....

 

Just some info for the million people who are asking about tucking 17 x 9's all the way around on a lowered car. I just finished my wheels / tires / suspension a few days ago and I had to do the following....

I'm running a 17 x 9 +45 set up, non staggered.

What you need to do.

Front -

- cut off the three fender tabs starting from the one closest to the headlight then make your way around.
- Use a fender roller to fold the lip then flair it out.
- Have a dremel handy so you can cut the shit out of the plastic in the fender well cause it will rub if you are really low.

Rears -

- Pull off the black rubber piece that covers the lip of the wheel well and place in garbage can.
- Fold the lip of the fender well then flair out your fender.
- Relocate the tab / point where your fender and bumper meets. (cut off the tab and drill new holes a few inches back)

P.S. stop crying about the paint you chipped and go buy some touch up...

I will post pics soon as I do not want to unveil the new RPF1's with out the last final touch..

Hope I helped...

 

went from staggered to