does any one have 17x8 et35 pics. either front, rear or all around.
lowered preferably. want to see how much camber i will need to run and what it will look like

 

I run -2.2 camber infront with 17x8+35 215/45/17 with rolled fenders flat. No rubs, lock-to-lock. Picture in sig. =)

 

^^ could you run any wider tires in the front without rubbing?

 

MORE PICS! lol

 

i barely clear it...rubs going up slopes and what not. depends on the drop.

 

Skunk2 springs. About 2 inches

 

I have 17x8 +35 front 17x9 +40 rear with Dunlop Starspecs. Link I'm running 235's front and 255's rear.

 

do you think 245 will be to much for the front. im rolled and trimmed put not pulled much

 

You should be fine though! What I think will matter the most is the height of your car and how low you want to go. Two of my friends with s2000 are running 255's all around. Make sure your fenders are rolled and flared or have some good camber. You can also get wide fenders. I'm going to get 255's because my Mugen Ap1 half bumper sits low and I don't want bring the car up. Just be careful when going into gas station or with pot holes if you get those tires. You can talk to my friends if you want. MugenAp2 and always_slammed. They know their stuff really well and plus they both run 255's all around.