Silverstone MY00 with CE28Nf
Thread Starter
Registered User
Joined: Jan 2005
Posts: 12
Likes: 0
Silverstone MY00 with CE28Nf
This is my first post after lurking on this site for over 4 yrs.
I did not see many ppl here are running on thess wheels
especially non staggered set up
so... thought I would share.
It is silverstone MY00 dropped 1.25" on Onlins suspension
with 17" Mercury Silver CE28Nf 8.5J, +53 offset , and 245/40/17 tires all around
Had this setup for over 6 month.
No rubbing issue except when the car is dipped after passing huge speed bump at hight speed,
but could be avoided by slowing down a bit
I don't have after market caliper,
but after checking the distance between rotor and spoke,
spoon caliper could be easily and safely fit in without any spacer
Sorry for the terrible pix quality
they were taken by my cell phone in a friend's garage in the basement
it was really dark.
Any comments is welcome
Thank you
This shot was taken for ppl who is worrying about sticking out front wheel.
I think it is very close to a perfect fit.
I did not see many ppl here are running on thess wheels
especially non staggered set up
so... thought I would share.
It is silverstone MY00 dropped 1.25" on Onlins suspension
with 17" Mercury Silver CE28Nf 8.5J, +53 offset , and 245/40/17 tires all around
Had this setup for over 6 month.
No rubbing issue except when the car is dipped after passing huge speed bump at hight speed,
but could be avoided by slowing down a bit
I don't have after market caliper,
but after checking the distance between rotor and spoke,
spoon caliper could be easily and safely fit in without any spacer
Sorry for the terrible pix quality
they were taken by my cell phone in a friend's garage in the basement
it was really dark.
Any comments is welcome
Thank you
This shot was taken for ppl who is worrying about sticking out front wheel.
I think it is very close to a perfect fit.
