Installed new exhaust rattle from rag top help
#1
Registered User
Thread Starter
Join Date: May 2007
Location: Clemmons
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Installed new exhaust rattle from rag top help
Installed new magnaflow exhaust today everything is fine with it no rattlles... but inside the cabin at 2500 to 3500 rpm or when the car is bogged down there is a bad vibrating buzzing that seems to be behind the seats way more when the top is up and windows are up. It must me something to do with the sound resanation in the car.... any ideas..... looking and looking help.
#7
Originally Posted by speedmaster,Jul 19 2007, 10:13 AM
I checked them... seem to be fine. Was it you jack???
In my car it was my jack. (I have an Eclipse)
Trending Topics
#9
Registered User
Join Date: Nov 2006
Location: Maryland
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
I installed a new exhaust manifold a couple week back. Sounded great at first, but a few days later started to hear a metal grinding sound when accelerating and mainly when turning right. I looked underneath and the catalytic converter and transmission support weren't touching, but they were close. You could also see small marks that looked like they may have been rubbing. I readjusted brackets and hangers and the noise went away.
So while the pieces weren't touching while standing still, with acceleration and the Engine/Transmission/Exhaust moving a little they did touch. Something to look for.
So while the pieces weren't touching while standing still, with acceleration and the Engine/Transmission/Exhaust moving a little they did touch. Something to look for.