Hey Guys. I am working with "Booztin" to gauge some interest for these custom wide front fenders. If there is interest these can be made for a direct bolt on 90MM wider front fenders using a mold from his custom front fenders made for his car.

Here is his build thread for those not familiar with it yet.

https://www.s2ki.com/s2000/topic/815...dy-in-progess/


The front fenders will be like no others out. They will be approx. 90mm wider a little over 3 1/2 inches. It will come with the option of having shaved side markers and will come with an extra piece to put on your front bumper so that it taper's into it.

These fenders will be 100% spot on with fitment considering they are molded off of the modified oem fender.

In the future we will also be offering rear arches/pieces that will be able to be molded onto your rear quarter panels to give you the same look as the picture below.
The rears will be approx. 140mm wider about 5 1/2 inches and will also come with a piece so that the flare tapers into the bumper.
But for now this gauging interest is only for the front fenders.

In the pictures below the front fenders are supporting 18x10.5 +15 with 275/35/18 tires on factory alignment specs.
The rears are supporting the same spec setup with 20mm spacers also on factory alignment specs.

The quality and fitment of these products will be exactly like oem.

Pricing for the front will be approx. 700-900 for the front with a group buy introductory price.
Pricing for the rear will be released at a later time also with a group buy introductory price.

So tell me what you guys think.

Please leave questions, comments, opinions.

Thank You!

 

im in!

 

how would the wider rears look with oem fronts?

 

wow thats crazy wide, id be in if I had the money

 

GEEZE that looks FANTASTIC! cant wait to see a completed car.

 

By the time these are out, I'll definitely be interested! I just hope shipping prices won't push these up $200+

 

very intresting.

Question, how would the fenders work as far as fitment if the bumper had to extended to make it fit. About 2-3"

 

It would be something similar to this except bigger to have it taper into the front bumper.

 

Thanks for the reply

Damn that would be a pretty big piece. Like 2-3in big.

the one you show is about 1in

 

[/quote]

Thanks for the reply

Damn that would be a pretty big piece. Like 2-3in big.

the one you show is about 1in
[/quote]


np , yea however it would taper down. Once molded it should look normal. Even that 1 inch peice looks odd unless its molded.