Hey guys, very quick question. Someone told me that the Single 60RS, 70RR/RS IS do able for the 06-07 AP2's and that there was a HOW TO on it. There was a lot of people saying that it would not work, due to certain parts not fitting correctly. I did however, here that they only way to make it work is that you need extended bolts and added a larger hanger on the exhaust. If any body can point me out to that thread or have additional insight on this, it would greatly be appreciated. Thanks!

-Don

 

my 06 w/ 70rr . no mods done. only thing i did have to use longer rubber hangers on some parts and the cross beam wont fit, you'll have to get longer bolts to reinstall. im putting the 70rs on it w/ a test pipe nextw eek and will take pics

 

any updates?

 

I was able to make the 60 fit my 08. By hamering a small flat where it hits the tunnal. It is still a little close I am going to get a clamp on heat sheild from JEGs just to be safe. This is a little riskey on Ti just take your time lots of little dents. If you have a J's exhaust it is do able. If you don't already have one buy a different exhaust.