LED Wide-Angle Parking lights
Thread Starter
Joined: Mar 2008
Posts: 1,289
Likes: 1
From: Ontario
Originally Posted by s3ngk4ng,Nov 17 2008, 01:28 AM
Hey Eric, looks like you've got the bulbs we were talking about!
I think those are going to look good on mine as well
Btw, for USA AP2's, these lights are on not as DRL's but used along with the headlights during the nights as well as parking.
And for the installation, just tilt the wheels inwards, pull out the inner fender, and you can easily see them? So it's no big of a hassle to install?
I think those are going to look good on mine as well
Btw, for USA AP2's, these lights are on not as DRL's but used along with the headlights during the nights as well as parking.
And for the installation, just tilt the wheels inwards, pull out the inner fender, and you can easily see them? So it's no big of a hassle to install?
Installation notes:
1) Tilt the wheel pointing inwards. (According to the wheel you are working on)
2) Remove the top three fender clips. (Very top, and the other two close to the headlight)
3) Pull the liner back to make room for your hands. You should see some of the headlight assembly connectors. The one you are looking for is a small white rectangular connector.
4) Twist the connector counter-clockwise and pull it out.
5) Remove the bulb by pulling it straight out. Insert the LED bulb. (NOTE: before putting the connector back in the headlight assembly, test the LED by turning the lights on. If the light does not come on, remove the LED and switch the positive and negative terminals)
6) Put the connector back into the headlight assembly and twist clockwise until it locks.
7) Reposition fender and insert the fender clips.
8) Repeat for other side.
Took me about 10 minutes for one side. Hope this was clear enough, let me know how it goes!
Registered User
Joined: Aug 2008
Posts: 111
Likes: 0
It shouldn't be such a hassle as it was for the HID lol.
There's a long crack for one of the inner fender now
So lucky though, we basically ordered on the same day, but mine has yet to come.
And a bit of info for the seller on the ebay site: person doesn't give tracking info so you're just going to have to wait to be surprised
There's a long crack for one of the inner fender now
So lucky though, we basically ordered on the same day, but mine has yet to come.
And a bit of info for the seller on the ebay site: person doesn't give tracking info so you're just going to have to wait to be surprised
Thread Starter
Joined: Mar 2008
Posts: 1,289
Likes: 1
From: Ontario
Originally Posted by s3ngk4ng,Nov 17 2008, 02:04 AM
It shouldn't be such a hassle as it was for the HID lol.
There's a long crack for one of the inner fender now
So lucky though, we basically ordered on the same day, but mine has yet to come.
And a bit of info for the seller on the ebay site: person doesn't give tracking info so you're just going to have to wait to be surprised
There's a long crack for one of the inner fender now
So lucky though, we basically ordered on the same day, but mine has yet to come.
And a bit of info for the seller on the ebay site: person doesn't give tracking info so you're just going to have to wait to be surprised
Thread
Thread Starter
Forum
Replies
Last Post
TommyAmrani
The S2000 Gallery
27
Sep 22, 2003 10:30 AM