S2000 Modifications and Parts Discussions about aftermarket products and parts including reviews, information and opinion.
Sponsored by:
Sponsored by: CARiD

Red "H" badges

Thread Tools
 
Old Nov 13, 2012 | 07:16 PM
  #21  
s2ka's Avatar
20 Year Member
Photogenic
Photoriffic
 
Joined: Mar 2003
Posts: 3,037
Likes: 26
From: SoCal
Default

It's not my pic so I don't know all of the details for each one. But the NSX-R badges are both there. I believe the big one went on the front, the small one on the back. The small one 75701-S1A-E11ZB is very close to the S2000 badge size for 02-09 cars. Price is about $75 per badge and they're not usually in stock so it takes a few months to get them.

There's also a smaller one for the rear of an EP3 Civic Type R that is about the size of 00-01 S2000 badges but it has a little curve to the back so I'm not positive it will sit flat on our cars. http://www.icbmotorsport.com/ep3cityrep3r.html
Reply
Old Nov 13, 2012 | 07:32 PM
  #22  
maranelloboy05's Avatar
Member (Premium)
15 Year Member
Photogenic
Liked
Loved
 
Joined: Jan 2010
Posts: 1,763
Likes: 149
From: Austin, TX
Default

I just measured and 75701-S1A-E11ZB is almost exactly the same size as the AP2 badges, now I just need to find them.
Reply
Old Nov 13, 2012 | 07:41 PM
  #23  
s2ka's Avatar
20 Year Member
Photogenic
Photoriffic
 
Joined: Mar 2003
Posts: 3,037
Likes: 26
From: SoCal
Default

Here are some width measurements:

00-01 OEM Honda S2000 badges
Front: 63mm
Rear: 70mm

02-09 OEM Honda S2000 badges
Front: 80mm
Rear: 80mm

Black Chrome OEM Honda badges
73mm

OEM NSX-R badges
Front: 90mm 75700-S5T-E01
Rear: 78mm 75701-S1A-E11ZB

OEM EP3 Civic Type R
Front: huge, don't bother
Rear: 63mm 75701-S5T-E01
Reply
Old Nov 14, 2012 | 05:08 AM
  #24  
maranelloboy05's Avatar
Member (Premium)
15 Year Member
Photogenic
Liked
Loved
 
Joined: Jan 2010
Posts: 1,763
Likes: 149
From: Austin, TX
Default

Originally Posted by s2ka
Here are some width measurements:

00-01 OEM Honda S2000 badges
Front: 63mm
Rear: 70mm

02-09 OEM Honda S2000 badges
Front: 80mm
Rear: 80mm

Black Chrome OEM Honda badges
73mm

OEM NSX-R badges
Front: 90mm 75700-S5T-E01
Rear: 78mm 75701-S1A-E11ZB

OEM EP3 Civic Type R
Front: huge, don't bother
Rear: 63mm 75701-S5T-E01
Thanks, confirmed what I thought. Any reason why people blur out part numbers on eBay?
Reply
Old Nov 14, 2012 | 06:24 AM
  #25  
FISH22's Avatar
Thread Starter
Registered User
Gold Member (Premium)
 
Joined: Nov 2005
Posts: 14,275
Likes: 12
From: Virgnia
Default

Great info, thanks guys!

Anyone have a measurement on the OEM S2000 colored ones? Are those the same exact size as the 00-01 factory badges? Or more the size of the black chrome kit?
Reply
Old Nov 14, 2012 | 07:03 AM
  #26  
Feezy's Avatar
Moderator
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Jun 2003
Posts: 7,041
Likes: 355
From: Arizona
Default

I made a post in a different thread where someone was asking for some emblem advice. Here a quick copy/paste of that post:


"I'm looking at my Hyper Rev's (Issue #76) right now and almost every AP1 in this issue has a color matched emblem.

I see a Spa Yellow, Silverstone, NFR, Monte Carlo Blue, Berlina, and GPW's. The Imola Orange does not have a filled emblem.

As I flip through the newer Hyper Rev's the AP2 all come with the same emblems that we have.

I have no idea why there is a difference, but if I didn't see the Monte Carlo Blue with the filled emblem I'd say that all of the AP1 non-premium colored cars had the filled emblem available. I know the filled emblems are the size of the 00-01 emblems, so it's possible that they are only available in the non-premium colors that were available for those two years? />

Actually, that makes a lot of sense now considering I've never seen a Suzuka filled emblem and Suzuka was an 02+ color."

Just from looking at my books any everything I've seen I am damn near positive that all of the 00-01 OEM Colors (Non-Premium) had filled badges avaliable as an option. The filled badges are the exact same size as the 00-01 emblems. From 02+ the OEM emblems grew in size. The filled JDM emblems are defiantly smaller than the emblems that I replaced on my 02.

I will warn you that when you remove the OEM emblem and replace it with a smaller one there might be a little marring on the paint from dirt that has worked it's way into/under the glue holding the emblem on. If you have a porter cable you can polish that mark out before you put the smaller filled emblem on the car.

Also a friend provided me these a while back, these are part numbers (front/rear) for the OEM S200 filled emblems:

Red
75700-S2A-000ZE
75701-S2A-000ZE

Yellow - (Spa I Believe)
75700-S2A-000ZF
75701-S2A-000ZF

Black
75700-S2A-000ZB
75701-S2A-000ZB

If I remember, I will check when I get home to verify that my red ones match those part number, I think I still have the packaging laying around.
Reply
Old Nov 14, 2012 | 11:11 AM
  #27  
s2ka's Avatar
20 Year Member
Photogenic
Photoriffic
 
Joined: Mar 2003
Posts: 3,037
Likes: 26
From: SoCal
Default

Originally Posted by maranelloboy05
Thanks, confirmed what I thought. Any reason why people blur out part numbers on eBay?
Makes it harder for people to order the right ones from other places...
Reply
Old Nov 14, 2012 | 11:13 AM
  #28  
s2ka's Avatar
20 Year Member
Photogenic
Photoriffic
 
Joined: Mar 2003
Posts: 3,037
Likes: 26
From: SoCal
Default

Originally Posted by FISH22
Great info, thanks guys!

Anyone have a measurement on the OEM S2000 colored ones? Are those the same exact size as the 00-01 factory badges? Or more the size of the black chrome kit?
I'm under the impression that the colored ones are all 73mm like the OEM black chrome badges. But be careful, there are a ton of cheap knock-offs out there that might not be the same size.
Reply
Old Nov 14, 2012 | 01:27 PM
  #29  
alSpeed2k's Avatar
Community Organizer
15 Year Member
Photogenic
Loved
Community Favorite
 
Joined: Sep 2007
Posts: 10,599
Likes: 79
From: The 604
Default

Originally Posted by Back-cracker
Originally Posted by FISH22' timestamp='1352826628' post='22148053
I've been looking at different OEM Honda red H badges over the last few weeks, and there seems to be a huge selection! Anyone know which ones fit our cars? As in, the two nubs on the back will fit into the slots. I'd prefer to pick up smaller red H badges, but just not sure which ones are right. Visited Inlinefour's website, and they probably have about 10 different types of H badges to choose from. And they have to be OEM, I won't buy any of the ones off eBay.

Look up under gallery "leester06 build thread". On page 4-6, he has an official F1 emblem emblem. Very hard to find, I can take pic for you on my car if you want it. />
Took me a while to find the post. Here it is for everyone else interested!

Do you have the same Back-cracker? Please post pics!
Reply
Old Nov 14, 2012 | 10:51 PM
  #30  
circuitclub's Avatar
15 Year Member
Active Streak: 30 Days
Liked
 
Joined: Sep 2008
Posts: 981
Likes: 27
Default

^I've been looking for stickers in place of emblems for quite a while now, still don't know where to get them. If you find a place, please share!
Reply



All times are GMT -8. The time now is 02:02 AM.