Sometimes its the little things that make the difference...
#51
Heres mine
[/quote]
I never noticed that RHD cars have the wipers turning the other direction. Never crossed my mind
#53
I found the CRZ uses the 400mm size (part# 76730-SZT-G01).
CRV uses 425 mm (part #76630-SWA-A01)
CRZ has 525mm (part# 76630-SZT-A01), but no 500mm.
Accord coupe uses 475mm as previously mentioned by OP.
I can't find a 500mm in honda's inventory. I wanted to keep it factory spec, but with the NWB style wiper.
I also cannot find a NWB distributor for the US, so buying direct is out the door.
Maybe toyota has something 500mm in their inventory...
400mm = 16"
425mm = 17"
475mm = 19"
525mm = 21"
CRV uses 425 mm (part #76630-SWA-A01)
CRZ has 525mm (part# 76630-SZT-A01), but no 500mm.
Accord coupe uses 475mm as previously mentioned by OP.
I can't find a 500mm in honda's inventory. I wanted to keep it factory spec, but with the NWB style wiper.
I also cannot find a NWB distributor for the US, so buying direct is out the door.
Maybe toyota has something 500mm in their inventory...
400mm = 16"
425mm = 17"
475mm = 19"
525mm = 21"
#54
^^ Just in case if anyone was wondering, you can definitely run 19" & 21". I'm running 20" on the driver side and 21" on the passenger side right now. I tried fitting 21" on the driver side, but part of the rubber was touching the top of the windshield although it ran fine. 21" is definitely the biggest you can run on the passenger side though. Hope this helps.
#56
Hey, this is for the wiper blade only right? do you know if it works for the wiper arm too?
#57
Registered User
I should've looked into why the wiper blades on an IS350 seem to last forever. I would've noticed they are the same design as these and started using them years ago on all my cars. Thanks to the OP for bringing this to my attention via this thread.
Henceforth, these type of wiper blades are the only ones I will use and recommend.
I went with 2 475mm Honda blades and they fit fine on my S2000.
Henceforth, these type of wiper blades are the only ones I will use and recommend.
I went with 2 475mm Honda blades and they fit fine on my S2000.
Thread
Thread Starter
Forum
Replies
Last Post