its been 5 years since i replaced a steering wheel.

def gonna go with the nrg quick release hub.

just wondering what else ill need with the ap1. also, what size is a good mm to go with in our car.
and what brand at that.

post up some pics and shout me some ideas.

 

im doing a 330 personal..

 

is this is a dedicated track car, ?

if not, please don't remove your airbag, that's very idiotic.

 

 

depends on your height, 350 might be the best way to go if you dont want to block out your tach.

try to drive a car with QR before you buy one, I made the mistake of buying one without test drive, long story short, i didn't like the play with the QR and end up not using it

 

I use 320mm in mine. definately get a good quality QR since most of the cheap ones have play on it. i use a momo hub for mine but its too long for a QR.

 

I have a 330mm personal grinta steering wheel and works bell hub and quick release. if I were to do it again, I'd just get a standard hub. I hardly disconnect the steering wheel

 

nrg<worksbell

 

thanks for the input guys.

so for QR.....what brand are you guys recommending? worksbell?

 

supposedly nrg made a copy of the worksbell. It basically boils down to the factor of the name

I tried both, the nrg locks very securely and does not have any play. the worksbell is same, but costs twice as much