Works Bell Steering hub install problem
Thread Starter
Joined: Jun 2010
Posts: 779
Likes: 0
Works Bell Steering hub install problem
I finally had the time to install the Works Bell Steering hub Model#223 and a Momo wheel.
The hub have a few problems...
First the sleeve is too long and will hit the steering column and put so much pressure against it that the steering is very stiff now;
second, the air bag light canceler plug is the wrong one. Its not plug-and-play am I suppose to hack in the wires?
Please advice.
The hub have a few problems...
First the sleeve is too long and will hit the steering column and put so much pressure against it that the steering is very stiff now;
second, the air bag light canceler plug is the wrong one. Its not plug-and-play am I suppose to hack in the wires?
Please advice.
Thread Starter
Joined: Jun 2010
Posts: 779
Likes: 0
Thread Starter
Joined: Jun 2010
Posts: 779
Likes: 0
Originally Posted by Gigdy' timestamp='1309269538' post='20726813
You have to cut the sleeve. It gets cut down like 2 "rings" or so. My resistor wasnt plug and play either. I had to make it fit.
Joined: Feb 2007
Posts: 1,707
Likes: 12
From: 703->781->626
Originally Posted by etang789' timestamp='1309441484' post='20734481
[quote name='Gigdy' timestamp='1309269538' post='20726813']
You have to cut the sleeve. It gets cut down like 2 "rings" or so. My resistor wasnt plug and play either. I had to make it fit.
You have to cut the sleeve. It gets cut down like 2 "rings" or so. My resistor wasnt plug and play either. I had to make it fit.
[/quote]
yep that is what you're supposed to do.
Thread
Thread Starter
Forum
Replies
Last Post
Rusler Firbrand
S2000 Under The Hood
82
Jul 12, 2015 08:14 PM
K7S2KGSXR750
Archived Member S2000 Classifieds and For Sale
5
Sep 18, 2010 03:32 PM