initiald3s

I have been searching the web and can't figure out whether the Fujitsubo Power Getter fits the AP2 06+. I can find that they only made the power getter for the AP1. Is there any reason why it wouldn't fit the AP2?

THMotorsports

The hangers and tip are slightly different. But you can make it fit easily enough.

heeltoe624

what type of modification would i have to do to make it fit a 2005 AP2 ?

Bullwings

running it on my 2006 AP2. Just need to play around with the different OEM hangers. you have the tri-angle shape hangers and the "8" shaped hangers. the tri-angle hanger allows you to change the position of the exhaust a bit.

I don't have any issues. Initially was hitting the cross member bar, but changed up the hanger config and fixed that. Didn't need to do any hammering of the tunnel.

heeltoe624

this is my first s2k just got it last week so i am not sure how u would configure the hangers, can u just unscrew it from the exhaust or will i need to cut and weld it ?

kos

The rubber hangers are what Bullwings are referring to. See the photo below:

Chuck S

Auto parts stores have a variety of rubber hangers if you can't make your existing hangers fit to your satisfaction. Just take what you have to compare what length you want.

-- Chuck

heeltoe624

is there a store or member that sells them or just autozone?

Chuck S

Any auto parts store (not a brand name) should have 2-hole rubber exhaust hangers. Pure guess as to "any" but the only time I needed some I just walked in to the nearest store and bought a couple.

-- chuck

heeltoe624

we have Oreillys here and its a hit and miss for things you need but its like down the street from me but I'll drive a bit further to check out a autozone. thanks everyone for all the reply also.