S2KI Honda S2000 Forums

S2KI Honda S2000 Forums (https://www.s2ki.com/forums/)
-   S2000 Naturally Aspirated Forum (https://www.s2ki.com/forums/s2000-naturally-aspirated-forum-213/)
-   -   Brian Crower Stage 2 Cams on an AP1 (https://www.s2ki.com/forums/s2000-naturally-aspirated-forum-213/brian-crower-stage-2-cams-ap1-1060975/)

s2k-jn 11-27-2013 04:39 AM
Brian Crower Stage 2 Cams on an AP1
 
Just bought these bad boys and was told they could deliver up to 15kW gain with the right ECU and tune, what're your thoughts?

Also is additional parts needed to install these?

jchan727 12-05-2013 07:28 PM
Originally Posted by s2k-jn (Post 22897389)
Just bought these bad boys and was told they could deliver up to 15kW gain with the right ECU and tune, what're your thoughts?

Also is additional parts needed to install these?
im about to do the same set up, in order to run these cams you will need to upgrade your valve trains and heavy duty TCT in order to get out best the performance and reliability for the motor. a proper ems is recommended. There is a huge thread about these cams, check out Real Street Performance's s2000 result for these cams!

Nik2k 12-06-2013 02:24 AM
Originally Posted by jchan727 (Post 22909904)
Originally Posted by s2k-jn' timestamp='1385559566' post='22897389
Just bought these bad boys and was told they could deliver up to 15kW gain with the right ECU and tune, what're your thoughts?

Also is additional parts needed to install these?
im about to do the same set up, in order to run these cams you will need to upgrade your valve trains and heavy duty TCT in order to get out best the performance and reliability for the motor. a proper ems is recommended. There is a huge thread about these cams, check out Real Street Performance's s2000 result for these cams!
hi ! im going with the same setup , and people of real street says to me that the taiming chain tensioner doesnt have to change. its allright with oem! :thumbup:

wildweSt2K_93 12-07-2013 06:19 PM
Looking into these same cams as well. And a full ITB setup in the future. I was wondering about the TCT as well but my guy At hippo performance told me the same as REAL street. The oem TCT is fine that when it starts to make the slightest noise have it taken out and cleaned well and you should be GTG. My goal with cams, velve springs, retainers, and TB + CAI and 70mm exhaust is to be in the 250-260whp range and leater down the road With an ITB setup im looking at around 320whp. Ill keep you guys posted and might do a write up. Who knows

Nik2k 12-08-2013 09:56 AM
Originally Posted by wildweSt2K_93 (Post 22912509)
Looking into these same cams as well. And a full ITB setup in the future. I was wondering about the TCT as well but my guy At hippo performance told me the same as REAL street. The oem TCT is fine that when it starts to make the slightest noise have it taken out and cleaned well and you should be GTG. My goal with cams, velve springs, retainers, and TB + CAI and 70mm exhaust is to be in the 250-260whp range and leater down the road With an ITB setup im looking at around 320whp. Ill keep you guys posted and might do a write up. Who knows
Excellent configuration bro !! what throttle body are you going to use???? :tipwink:


All times are GMT -8. The time now is 04:03 AM.


© 2024 MH Sub I, LLC dba Internet Brands