S2KI Honda S2000 Forums - F22C all motor (new member)

S2KI Honda S2000 Forums (https://www.s2ki.com/forums/)

- S2000 Naturally Aspirated Forum (https://www.s2ki.com/forums/s2000-naturally-aspirated-forum-213/)

- - F22C all motor (new member) (https://www.s2ki.com/forums/s2000-naturally-aspirated-forum-213/f22c-all-motor-new-member-1065133/)

F22C all motor (new member)

HI to everyone.

First i want you to know that my English is horrible, i understand 99% of the topics but i dont write or speak very well.

I'm from Portugal and i'm leaving at Switzerland.

Unfortunately i dont have a S2000, but i have a Toyota AE86, with a F20C engine fited, know being transformed to an F22C.

I know and i visite the site by 1 year i think, but never did any comment or topic, but now, i have been gathering all the parts for my engine and i have almost all of them. Its a slow project, because its a full built car and engine, its my obsession.

The car is not ready but i hope to have it ready this new year. Until now, its a 4 year project.

I will start to give a BIG "thanks" for Patrick from Urge Designs, he help me to chose almost all the parts for my engine.

I bought a F20C but like it is a full built engine, i decided to do the F22C to get some few more hp.

I'm not a mechanic and i never worked with cars. I think before start this project i change the oïl of one car lool It has been a big big adventure lool was me who chose all the parts for the chassis, and to chose them, i passed all this years searching and reading on internet, and talking with people who knows about the bussiness.

I dont have hp goals for this engine, because i dont know how it will works on AE86 chassis, because the exhaust and i will probably need to modify the headers. But i hope to have between 320/340 crank hp.

The only thing i can show for now is the parts, the engine will be ready in 2 or 3 months after have all the parts. The engine is "almost" a GT Engine spec from Urge Designs

So list is:

1- F22C Crank (searching one)
2- Crower rods
3- Wiseco 89mm Custom Urge Designs pistons
4- Supertech valve train kit
5- Urge Designs ITBS
6- Urge Designs full head work
7- Cometic head gasket
9- Brian Crower stage 2 cams
10- ACL bearings
11- Darton Sleeves
12- Injector dynamics injectors
13- Works pulleys kit (less crank)
14- Fluid damper crank pulley
15- OEM new alternator, starter motor, tensioner idler and chain tensioner, oil pump and oil pump chain, water pump, cams chain, all new block and valve cover gaskets, etc
16- ARP Studs
17- Fidanza flywheel
18- Haltech ECU and Racepak data logger dash kit
19- Mocal oil coller
20- Koyo water radiator
21- Stage 2 Competition Clutch (dont know yet but probably this one)
22- Modified oil pan to fit AE86 crossmember
23- Custom engine mounts
24- J's Racing Header
25- Custom 3" exhaust

And all the other parts outside engine like walbro fuel pump, atl fuel cell, etc..

I have some of the parts right now, and i'm wating for the head, pistons and rods from Urge Designs. Will order the sleeves this month and try to find a F22C crank.

I will put some photos this afternoon, i have to go now.

I want to receive all yours feedbacks and knowledge, i'm here to learn =)

Looks interesting. Are you sending the whole engine to Urge?

Welcome Vilela :) Looks like a nice engine build you have for yourself with ITB's and all, and it should move the car nicely :thumbup: I'm running 89mm pistons as well, if you didn't know these with the standard F22 crank will up the displacement .1, so you could call it an F23.

Quote:

Originally Posted by MB (Post 22943542)

Looks interesting. Are you sending the whole engine to Urge?

No, i bought the parts and Patrick help me to chose the parts.

I wanted to buy the all engine packadge, but i needed to send my engine, pay the shiping costs and taxes, and after, pay the shiping costs to switzerland and the taxes again, to expensive =(

But i hope to get very close hp numbers, my fear is the headers, this engines are to sensitive to headers change, but i will see what i can do.

Quote:

Originally Posted by s2000Junky (Post 22943906)

Thanks :)

In the end my car will weight aproximatelly 900 kg, its more than enought, even with a oem f22c was enought =)

Yes, i knew that f23c question, i did some research, i was thinking to buy a f24c stroker kit, but i prefer more reliability, thats why i chosed this "f23c" build.

Looks like an awesome build!