No Flaming This Time :)
Since in the last thread that blew up!!! people were talking about the C6, I thought I'd post a pic that was taken of a 1/8th model C6. It's kinda fuzzy. I made it yellow to enhance the body lines slightly. You can really tell how the wheels have been pushed out to the corners for even better handling and possibly a larger engine (?
).
Has there been any good pics or new info on the new NSX?
).Has there been any good pics or new info on the new NSX?

The only info I've seen on the 2003 NSX was in the June issue of Automobile magazine. While the car is on the cover, the article is short even if you are an optomist.
To summarize the car will have a 3.4l i-vtec rated @ 350hp, 6sp, integrated lights, nearly all machine made/assembled, and 10-15k cheaper. If the above is true, this car will be a real winner and I hope someone can confirm or deny. The NSX will likely be my next car purchase.
To summarize the car will have a 3.4l i-vtec rated @ 350hp, 6sp, integrated lights, nearly all machine made/assembled, and 10-15k cheaper. If the above is true, this car will be a real winner and I hope someone can confirm or deny. The NSX will likely be my next car purchase.
Originally posted by jerrypeterson
The only info I've seen on the 2003 NSX was in the June issue of Automobile magazine.
The only info I've seen on the 2003 NSX was in the June issue of Automobile magazine.
If you look at the picture, I think it looks like it is the current NSX with the RSX's headlights photoshopped onto it.
Trending Topics
I know this is a little off for this thread. But does anyone see a familiar between the vett front-end and the front-end of the Mazda RX-7. I have the rx-7 and everytime if I passed a vett at night, I often mistake it for another 7. Especially the silver one, they're very similar, the vett front is a little thinner and lower.





looks like a vette on drag radials hopped up in the back to me.. and mashed in the front end
