Identify this part, please #75700-S2A-000ZD
Hey all,
I scored an extra JDM badge from a fellow owner over the weekend! Unfortunately I can't tell if it is for the front or the rear (posts are different?). Also, since I have an '00 the badges are smaller than '02+. Do the JDM badges also come in two sizes, or do I go big with JDM?
I called my local Honda parts counter (actually 2 of them) and neither one could handle it - idiots as usual. Even with a part number, supposedly their "system" could not handle it. Whatever. I'll just come to the REAL experts........S2KI!!!!!
As always, any help is mucho appreciated,
Hockey
I scored an extra JDM badge from a fellow owner over the weekend! Unfortunately I can't tell if it is for the front or the rear (posts are different?). Also, since I have an '00 the badges are smaller than '02+. Do the JDM badges also come in two sizes, or do I go big with JDM?
I called my local Honda parts counter (actually 2 of them) and neither one could handle it - idiots as usual. Even with a part number, supposedly their "system" could not handle it. Whatever. I'll just come to the REAL experts........S2KI!!!!!
As always, any help is mucho appreciated,
Hockey
not really. The post size is diffrent front and rear so its easy to tell by pic. The other diff front and rear was that the front had 2 strips of tape(top and bottom) on the back and the rear badge tape covered just about the entire back of the badge.
Im not too sure about the diffrent sizes. I got mine from H & A, not sure if they are a board sponsor still but they do list the badges on their site. So Im sure they know the part numbers for sure. Sounds like a front to me though.
http://www.handa-accessories.com/s2000-03.html
http://www.handa-accessories.com/s2000-03.html
tape across the the top and bottom is the frt badge (just did mine saturday)
the posts on the frt badge is more rounded too (so the lock washers can slid over them)
these are a bit bigger than the old <02 badge and will cover the area
the posts on the frt badge is more rounded too (so the lock washers can slid over them)
these are a bit bigger than the old <02 badge and will cover the area
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post





