Inner cover installed
Thread Starter
Registered User
Joined: Jun 2001
Posts: 273
Likes: 0
From: ABINGDON
Inner cover installed
I installed my black inner cover and it looks "sweeet" It really dresses up the interior. Honda should make a headliner as part odf standard equipment. I highly reccomend it for anyone who is thinking about it. I ordered mine from HMS motorsport- I got their name last year befor I became an s2ki member. I found a web site that was importing items. I e-mailed them consitently for a US distributor.. Apperantly it is the same top as MG racing only difference mine didin't come w/ a diagram just written instruction. Took about two hours. Thanyou all for helping me out on the install tips
Thread Starter
Registered User
Joined: Jun 2001
Posts: 273
Likes: 0
From: ABINGDON
It reduces the wind noise quite a bit-- I purchased it for 350.00 from HMS motorsport. I could have installed it in less time w/ another helper but I still finished it in reasonable time. The material is very good--looks like it will last for a long time
Thread Starter
Registered User
Joined: Jun 2001
Posts: 273
Likes: 0
From: ABINGDON
Not a problem, just when you first install it keep everything loose, do not tighten any of the velcro untill you fold the top two or thrre times-this is so you can see if it is installed and not interfering w/ the fold ing mechanism. After you do that, tighten and make a few simple adjustments and it looks stock The cool thing is that when the top goes back up there aren't any creases. I left the top up for 24hrs just to get the material stretched.--thats just my own preferance.
The cool thing is that when the top goes back up there aren't any creases. I left the top up for 24hrs just to get the material stretched.--thats just my own preferance.
