I currently have the OEM wing spoiler (AP2, not CR) and want to change to the lip spoiler. All this time I've been under the impression that the mounting holes are in different spots, but does anyone know this for sure.

If they're the same holes, it will save me the headache of finding a full trunklid, I've been too slow on the draw twice already...as I'll just buy the lip spoiler and have it painted.

this is the best thread I could find for reference, but the question was never answered.

https://www.s2ki.com/forums/index.php?showt...&#entry14837453

 

Actually, following these instructions, they look different...but will the lip spoiler cover the extra holes needed for the wing? I'd plug them with wax or equivalent.

http://www.handa-accessories.com/S2000/s2kspoiler.pdf

http://www.handa-accessories.com/S2000/04s2kwing.pdf

 

You want to sell your OEM ap2 spoiler?

 

yeah, if i can...you know...get either a replacement trunk (blank or with lip spoiler), or get a lip spoiler knowing that the holes will be covered.

so far i haven't had any luck or answers...

 

or, i'll trade you trunks straight up...?

what's your configuration?

 

PM sent. Hopefully someone will answer your questions

 

I think that the holes are different and won't all be covered but can't remember 100%
I had the AP2 spoiler but sold it before installing and I think that was one of the reasons but don't remember completely.
I have the lip spoiler on now.

 

Front holes would be visable and uncovered by going from oem (non-cr) wing to the lip. Sorry.

 

I installed my oem lid spoiler myself (not the oem wing), and judging from the picture here from the oem wing installation, it is using the same holes...BUT, there are other holes needed for the oem lid spoiler, and that should be a none issue.

http://good-times.webshots.com/photo/29580...025981935beSmbP

The above pic is from these directions:

http://forums.s2kca.com/showthread.php?t=15569

Let me know if you need me to clarify anything.

EDIT: Looks like I got ahead of myself. Looking at this pic here,
http://good-times.webshots.com/photo/27988...025981935iiXslD

the hole being painted may not be covered by the oem lid spoiler.

 

The Lip spoiler will not cover the front mounting holes of the Wing.