race spring on oem top hat?
04-22-2006, 05:14 PM
#1
Registered User
Thread Starter
![[AP2-2NV]'s Avatar](data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 50 50'><circle class='avatar-circle-default' fill='%238c44db' cx='25px' cy='25px' r='20px'></circle><text class='avatar-text-default' x='49%' y='53%' fill='white' text-anchor='middle' alignment-baseline='middle'>[</text></svg>)
Join Date: Mar 2006
Location: South FL
Posts: 1,589
Likes: 0
Received 0 Likes
on
0 Posts
race spring on oem top hat?
im getting the koni threaded perch kit, and it looks like this.
i'll be using a 8 inch eibach spring with a 2.25 ID. my question is, do i use that upper spring perch? i'm not sure how it would sit...or do i run a spacer like the ground control's?
......or do i just sit them against the top hat?
also, ground control uses a 2.5 ID spring, and it sits with the oem top hat, can a 2.25ID spring sit with the oem top hat or am i better off going with a 2.5 ID spring.
i'll be using a 8 inch eibach spring with a 2.25 ID. my question is, do i use that upper spring perch? i'm not sure how it would sit...or do i run a spacer like the ground control's?
......or do i just sit them against the top hat?
also, ground control uses a 2.5 ID spring, and it sits with the oem top hat, can a 2.25ID spring sit with the oem top hat or am i better off going with a 2.5 ID spring.
![[AP2-2NV] is offline](https://www.s2ki.com/forums/images/s2ki/statusicon/user_offline.gif)
Thread
Thread Starter
Forum
Replies
Last Post
cleans2kbro
S2000 Under The Hood
4
07-21-2018 03:34 AM