cel: P0411
#1
Registered User
Thread Starter
Join Date: May 2005
Posts: 1,125
Likes: 0
Received 0 Likes
on
0 Posts
cel: P0411
its the one that you get after installing aftermarket intakes. the first time it came on was because i put on the check valve backwards=P. fixed that, cel went away after a few driving cycles..
after a couple weeks, cel came on again.. got it pulled @ autozone.. same code, checked everything.. after a little bit the personnel said that he reset the code? and it went away..
after a day, at night, cel went on again.. didn't have time to pull code but.. ;[. any ideas?
after a couple weeks, cel came on again.. got it pulled @ autozone.. same code, checked everything.. after a little bit the personnel said that he reset the code? and it went away..
after a day, at night, cel went on again.. didn't have time to pull code but.. ;[. any ideas?
#2
Registered User
Join Date: Nov 2005
Location: Los Angeles, CA
Posts: 14,373
Likes: 0
Received 0 Likes
on
0 Posts
P0441 Evaporative Emission Control System Incorrect Purge Flow
P0414 Secondary Air Injection System Switching Valve A Circuit Shorted
are you sure it's not P0411....?
P0411 Secondary Air Injection System Incorrect Flow Detected
P0414 Secondary Air Injection System Switching Valve A Circuit Shorted
are you sure it's not P0411....?
P0411 Secondary Air Injection System Incorrect Flow Detected
#3
Registered User
Join Date: Nov 2005
Location: Los Angeles, CA
Posts: 14,373
Likes: 0
Received 0 Likes
on
0 Posts
If it is P0411 thats means one of your vac lines are loose.
Make sure all your lines are connected
https://www.s2ki.com/forums/index.php?showtopic=105368
Make sure all your lines are connected
https://www.s2ki.com/forums/index.php?showtopic=105368
#6
Registered User
Thread Starter
Join Date: May 2005
Posts: 1,125
Likes: 0
Received 0 Likes
on
0 Posts
i pretty sure its connected right. just dunno why the light still comes on.. guess i'll get it pulled tomorrow again to check if its the same code or not.mm i DID buy new tubes for the hoses for installing the intake. what if the vaccumm hoses are leaking? not tight? will that make the cel?
#7
Registered User
Join Date: Nov 2005
Location: Los Angeles, CA
Posts: 14,373
Likes: 0
Received 0 Likes
on
0 Posts
yes they all have to be tight and connected.make sure they are connected in the right place.take a look at the link and make sure everything is the same.
Trending Topics
#8
Thanks
Thread
Thread Starter
Forum
Replies
Last Post