flip the little white check valve around that goes rite after the solenoid
i had a cel come on too when i installed mine. then i flip the little check valve around then cel went away.

 

Okay, I'll try that too.

I'll post the pics a little later.

Thanks again guys.

 

this should fix it, mine did the same thing.

 

Just to wrap this thread up.......I struggled with various attempts to figure the vacuum line routing since I KNEW I had followed the diagram to the letter of the instructions.

Well, as it turns out I failed to re-install the electrical connection on the air solenoid. Oopsy!!! It wouldn't have mattered how many different ways I tried the check valve or lines - with that connector left hanging down in the lower engine bay.

5 minutes of someone else looking at it (Spugen) and sure enough, it is good to go.

So, don't do what I did. Hehehehe.

-Hockey