i bought an x brace second hand without the studs. it turns out they are the most impossible size to find ever. they are 10mm studs with a 1.25 pitch, and require an allen screw cap head - they are simply almost non-existant.

does anybody know of any kind of hardware website or maybe even a way to get these from spoon?

any info would be great

 

make sure it's dot approved grade bolt also,

good luck finding one

 

Are they bolts or studs?

 

They are M10 x 1.25 X 35MM Socket Head Cap screws if I remember correctly.

 

http://www.metricspecialties.com/

Great place, they have almost everything.

 

10F30KCSJ or 10F40KCSJ should be the bolts you need from http://www.metricspecialties.com/

 

yes, thanks much! i knew they were m10 x 1.25 but i was not sure of the proper length. i appreciate it!