Starter bolts

Reply Subscribe

Thread Tools

Jun 11, 2010 | 06:33 AM

Sideways

Thread Starter

Joined: Oct 2000

Posts: 9,033

Likes: 21

From: South of the pier, Huntington Beach, CA

Starter bolts

I need to install a starter and the bolts have been removed and need to be replaced.
Anyone know what size bolts I should get?

Thanks.

Jun 11, 2010 | 06:59 AM

Stratocaster

Joined: Dec 2001

Posts: 11,399

Likes: 19

The online parts resources have the bolt size and length. The thread pitch is the only thing they don't list. I will have to check but IIRC it is M10 x 1.25.

Jun 11, 2010 | 07:24 AM

SpitfireS

Joined: Jan 2006

Posts: 4,953

Likes: 25

From: 17 ft below sea level.

In "M10x1.25" the pitch is 1.25mm.
Normal M10 thread has a pitch of 1.50mm.

Jun 11, 2010 | 07:42 AM

Stratocaster

Joined: Dec 2001

Posts: 11,399

Likes: 19

Quote:

Originally Posted by SpitfireS,Jun 11 2010, 09:24 AM

In "M10x1.25" the pitch is 1.25mm.
Normal M10 thread has a pitch of 1.50mm.

Agreed. However IIRC these are fine threaded. I.E. 1.25

Jun 11, 2010 | 07:48 AM

Stratocaster

Joined: Dec 2001

Posts: 11,399

Likes: 19

Lower bolt 95701-10040-08 BOLT, FLANGE (10X40)
Upper bolt 95701-10080-08 BOLT, FLANGE (10X80)

I will verify the thread pitch later today when I have a chance to get to storage.

Jun 11, 2010 | 08:53 AM

Sideways

Thread Starter

Joined: Oct 2000

Posts: 9,033

Likes: 21

From: South of the pier, Huntington Beach, CA

Quote:

Originally Posted by Stratocaster,Jun 11 2010, 08:48 AM

Lower bolt 95701-10040-08 BOLT, FLANGE (10X40)
Upper bolt 95701-10080-08 BOLT, FLANGE (10X80)

I will verify the thread pitch later today when I have a chance to get to storage.

Thanks all, It is a fine thread.

No Honda dealer stocks them.

Rummaging through my parts box there is a bolt that holds the rear transmission mount that is 10 x 80 with the fine thread and it works.