Throttle cable adjustment
Thread Starter
Registered User
Joined: Jul 2005
Posts: 607
Likes: 0
Throttle cable adjustment
Hey guys. When the service manual says that the "free play" in the throttle cable should be within 4-6mm, are they talking about the deflection of the cable (up and down movement or sagging of the cable) or the play that is present if you hold the cable and move it side to side? Thanks guys!
Thread Starter
Registered User
Joined: Jul 2005
Posts: 607
Likes: 0
Maybe you adjusted it too tight. If you tighten it too much then the throttle valve will remain open even when you are not depressing the accelerator pedal. I dunno that's just a guess. Someone with more experience will answer both our questions 
Registered User
Joined: Oct 2000
Posts: 4,467
Likes: 3
From: Davie, FL
Be certain not to over-tighten the throttle cable. Some freeplay is necessary, and if you can achieve WOT at the bottom of the accelerator pedal stroke then making the adjustment any tighter will place unnecessary tension on the throttle cable. This can lead to breakage and stress on intake manifold components.
Trending Topics
Joined: Oct 2001
Posts: 5,729
Likes: 2
Woh woh woh...
I can make it deflect more than 4-6 mm whether it's in spec or out. You are forgetting one parameter. If they were talking about deflection, you would have a "force" specification as well. It would read 4-6 mm with, say, 5 lbs. of pressure. To do this you'd hook a fish scale to the cable and pull until it reads the specified weight limit, then measure deflection of the cable.
By putting a clothespin on the cable, there will be little to no deflection. On the other hand, if you'd rest your body's weight on it, there will be great deflection.
Now what do you guys think?
It could still be vertical play that Honda is referencing, but I'd look for the key word "deflection" if this were the case.
I can make it deflect more than 4-6 mm whether it's in spec or out. You are forgetting one parameter. If they were talking about deflection, you would have a "force" specification as well. It would read 4-6 mm with, say, 5 lbs. of pressure. To do this you'd hook a fish scale to the cable and pull until it reads the specified weight limit, then measure deflection of the cable.
By putting a clothespin on the cable, there will be little to no deflection. On the other hand, if you'd rest your body's weight on it, there will be great deflection.
Now what do you guys think?
It could still be vertical play that Honda is referencing, but I'd look for the key word "deflection" if this were the case.