The Griot’s Boss Foam Canon System is easy to use if you have a pressure washer. It comes with different colored pick up “nipples” that you will put into the puck up tube according to the type of pressure washer that you have (gas or electric) and the output PSI. The bottle attaches to unit head, or the head will screw onto a 22oz or 35 oz Griot’s bottle. No premixing required.

i use a 40 degree tip, and that’s plenty strong enough to pre-rinse and foam the S. I use Griot’s Foaming Surface Wash for maintenance washing, rinse that off and apply Griot’s Foaming Poly Gloss, sll through the Boss Foam canon. Let that dwell according to directions, then hose off. I have my McKee’s37 Car Dryer ready and blow-dry the car in a matter of minutes.

 

The Griot's BOSS setup is great for use with a power washer. I will be doing a review on that as well. This foaming sprayer is a good budget setup for the average DIY user.