Mark this thread as Unsold
For Sale due to deployment
Thread Starter
Registered User
Joined: Aug 2008
Posts: 5,547
Likes: 0
From: south east georgia
For Sale due to deployment
hey guys.
i finally got the word that im deploying and i wont have the time to finish building my turbo setup before hand so im going to sell it as a full kit and start from scratch with a bigger setup when i return.
items incluced:
Bolt Ons:
speed craft T3 manifold
turbonetics T3/t04e 60-1 turbo
turbonetics T3/t04e 50-1 turbo (shaft needs replacing $50 ebay part)
speed craft 4-bolt down pipe
speed craft 4-bolt waste gate dump (to atmosphere)
TIAL 38mm wastegate
TIAL 55mm BOV
2.5" charge pipes
24"x16"x2.5" intercooler
all hardware included
Electrical:
AEM EMS 1012 series 1
AEM patch extension harness
AEM 2bar map sensor(0-30psi)
AEM TruBoost guage and controller (0-30psi)
AEM A/F UEGO guage and O2 sensor
Autometer dual guage A-pillar pod
Oil System:
oil filter relocator(have to remove factory oil cooler)
Aftermarket readiator style oil cooler
3/4" stainless lines from block to filter to oil cooler and back
turbo oil feed line with restrictor
turbo oil return line
large capasity Fram oil filter new but filled with oil durring install
i think thats about everything that i have that goes with the kit. i can remove a few things from the list to lower the price of the kit but most of the stuff listed is necessary to complete the install.
many of you may have seen my build thread and should already know that the turbos i have were both blown. the 60-1 will be completely rebuilt before sale and will be in good working order before shipment. the 50 trim will need a new shaft but you can get it from ebay for pretty cheap.
i do not want to part out the kit as of right now and im not looking for trades.
im asking 5500 for everything together plus shipping. if you use paypal add 3%.
ill post pictures up later tonight when im not as lazy.
i finally got the word that im deploying and i wont have the time to finish building my turbo setup before hand so im going to sell it as a full kit and start from scratch with a bigger setup when i return.
items incluced:
Bolt Ons:
speed craft T3 manifold
turbonetics T3/t04e 60-1 turbo
turbonetics T3/t04e 50-1 turbo (shaft needs replacing $50 ebay part)
speed craft 4-bolt down pipe
speed craft 4-bolt waste gate dump (to atmosphere)
TIAL 38mm wastegate
TIAL 55mm BOV
2.5" charge pipes
24"x16"x2.5" intercooler
all hardware included
Electrical:
AEM EMS 1012 series 1
AEM patch extension harness
AEM 2bar map sensor(0-30psi)
AEM TruBoost guage and controller (0-30psi)
AEM A/F UEGO guage and O2 sensor
Autometer dual guage A-pillar pod
Oil System:
oil filter relocator(have to remove factory oil cooler)
Aftermarket readiator style oil cooler
3/4" stainless lines from block to filter to oil cooler and back
turbo oil feed line with restrictor
turbo oil return line
large capasity Fram oil filter new but filled with oil durring install
i think thats about everything that i have that goes with the kit. i can remove a few things from the list to lower the price of the kit but most of the stuff listed is necessary to complete the install.
many of you may have seen my build thread and should already know that the turbos i have were both blown. the 60-1 will be completely rebuilt before sale and will be in good working order before shipment. the 50 trim will need a new shaft but you can get it from ebay for pretty cheap.
i do not want to part out the kit as of right now and im not looking for trades.
im asking 5500 for everything together plus shipping. if you use paypal add 3%.
ill post pictures up later tonight when im not as lazy.
Thread Starter
Registered User
Joined: Aug 2008
Posts: 5,547
Likes: 0
From: south east georgia
the tires.... hmm
1: dunlop direzza star spec (oem stock sizex4)(fronts are in good cond.backs are worn pretty badly)
2: falken Azeni 452 (265/40x2, 245/40x2 (beaten and used but can go a few miles till a change needs to be made))
3: hoosier (225/55/16 all four, got them from dan almost a year ago and never used them)
the hoosiers are on the oem AP1's and can be sold with the rims if you want. lookin at 200 for the set together or make an offer on either the tires or the rims separate.
the enkei's im asking 850 without tires and 1000 with tires (almost new 90% on rears still)
the tires on them are falken 452's in 245/45/17 and 265/40/17
i also have the old style center caps and one of the new version
there is a fifth wheel in the the deal but its got a dent in the lip that would need to be repaired (front wheel 17x8+40 with tire on it)
1: dunlop direzza star spec (oem stock sizex4)(fronts are in good cond.backs are worn pretty badly)
2: falken Azeni 452 (265/40x2, 245/40x2 (beaten and used but can go a few miles till a change needs to be made))
3: hoosier (225/55/16 all four, got them from dan almost a year ago and never used them)
the hoosiers are on the oem AP1's and can be sold with the rims if you want. lookin at 200 for the set together or make an offer on either the tires or the rims separate.
the enkei's im asking 850 without tires and 1000 with tires (almost new 90% on rears still)
the tires on them are falken 452's in 245/45/17 and 265/40/17
i also have the old style center caps and one of the new version
there is a fifth wheel in the the deal but its got a dent in the lip that would need to be repaired (front wheel 17x8+40 with tire on it)
