When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
UK & Ireland Traders ForumGet great deals here!!
A Forum for UK & Irish Traders to offer their products or services and sell. If you are a trader and interested in participating please send a Private Message to AquilaEagle
Are you able to give me a price (if available?) for a pair of Accord Type R front callipers?
Ta
Hello!
I'm afraid I can only offer the Right (drivers side) one - its RRP £319.34 I can offer you 10% off this.
The passenger side one is discontinued and is no longer available as a complete unit. The Pistons, Pins & Retainers are all available desperately. And all Seals can be purchased as part of a caliper repair kit.
Looking for S2000 AP1 Headlight washer jets, can you quote me shipped to Dubai? please do share pics of the same. netpsyche@gmail.com
Hello,
We order these in on demand (as some are colourcoded here) the AP2 chassis was never realised here just a facelift with the F20 engine with the VIN AP1.
Drop the team an email on eshop@hendy-group.com and we can work out the correct ones for you.
Si can you price the following bits please, awkward to explain so have included a couple pics hopefully you can get part numbers from this? Its the bolts and nuts highlighted in yellow. Sub Frame Bolts.
I need:
4x 14 x 1.5mm bolts.
2x 12 x 1.25mm bolts. Exhaust Bolts various.
8x 1.25mm self locking nut for exhaust manifold.
2x 8 x 1.25mm bolts for Cat
Also is this the correct clutch for my MY08 ?
Part No. 22105-PCX-325
I will be buying all the below also so if you can sort me the best discount you can for the lot that would be great !
Part No. H33801S2AJ02
Part No. 18115PCX014
Part No. 18229-PCX-003
Si can you price the following bits please, awkward to explain so have included a couple pics hopefully you can get part numbers from this? Its the bolts and nuts highlighted in yellow. Sub Frame Bolts.
I need:
4x 14 x 1.5mm bolts.
2x 12 x 1.25mm bolts. Exhaust Bolts various.
8x 1.25mm self locking nut for exhaust manifold.
2x 8 x 1.25mm bolts for Cat
Also is this the correct clutch for my MY08 ?
Part No. 22105-PCX-325
I will be buying all the below also so if you can sort me the best discount you can for the lot that would be great !
Part No. H33801S2AJ02
Part No. 18115PCX014
Part No. 18229-PCX-003
Thanks for your time again
Hello!
I have it all set up using your previous info from the GB - Still in Dunwear?
All in with all discounts applied - REF 42137 - I have emailed a copy of the estimate to you live.co.uk email