I have an AP1 but will have an AP2 bumper with lip.

I am NOT planning on switching to the AP2 splash shields so will this splitter still bolt up fine? Im thinking it may not because not all the bolts on the ap1 splash shield line up with the ap2 bumper/lip. Will this be a problem?

 

Yes there will be ! haha I knew I should have taken some pics today haha tbh you end up mounting it to the bumper not to the splash guards and I used an additional washer and but to sandwich it together

 

Yes there will be a problem?

Seems like their out of stock too but you can add to cart and order? Anyone know when they'll be in stock.

 

Well I'm
Pretty sure that the thing it mounts too are the silver clips that sit in the mud flap but since ap1 and ap2 have different design you can't actually have it line up properly but 3 bolts line up properly 2 you'll have to just mount the silver piece to the bumper an have the bolt thread through from the splitter to lip or just use a washer and nut to clamp it (it'll still be going through a hole )

 

It says out of stock but you can still order it. I use to have this splitter but be careful if your lowered cause mine got caught while I was driving through some construction and it destroyed my lip/bumper and ripped my splash guards out.

 

Haha I think with or with out the splitter there would have been damage

 

Had one of these and sold it because I didn't like how it fit. Doesn't conform well to the underside shape of the OEM AP2 lip.

 

Hahaha.... no my car would have been fine if I didnt have the splitter. There are other members on here that has had this happen to them aswell, so im not the only one

 

Mines been fine so far. I think two ish years an like 6k miles. Fit is decent but not stellar. Overall I have been happy but I can see what people say about it not conforming to ap2 oem lip perfectly.

 

I had an AP1 a while back and had the AP2 bumper/lip and this fit on mine just fine. Just be patient with the install. I also made a custom license plate holder that directed air up into the radiator that I sandwiched in between the lip and splitter. You should have no problem.