I have a few things up for sale to make room for new parts that I need to build my budget for the track season. I'll be constantly adding different parts, so check back to see what I have!

1. AP1 OEM Black Seats

Condition: Driver seat has normal wear on the bolsters, no rips or tears. I would rate it 8/10, not bad for a 9 year old seat. Passenger seat isn't quite in the best condition. It has a small tear in between the stitching. I think that an upholstary shop can fix it by just stitching it back together. I would rate it 7/10. Driver seat is already out of the car, passenger can be removed quickly. I'm asking $550 FIRM picked up in San Mateo since I need to get rid of the seats and get some other stuff I need.

Driver Seat:













Passenger Seat:







2. I have a Seibon OEM style hood up for sale. It has cosmetic damage on the top side of where the latch is. The previous owner of the hood thought that he could fix it by using epoxy, however, they did a very poor job of it. If you could fill it and paint it, would would look fine. I was going to use it as a track hood, but I bought another hood to use for the track w/ vents. I'm asking $100 obo. I need to get rid of it since it's just taking up space, so I'm pretty open to offers you might have.



A scratch



Epoxy damage







3. I have a few tires that I want to put up for sale. Here are the sizes and specs that I have.

Package 1: PENDING UNTIL I CAN CONFIRM THE SALE OF THE WHEELS
A. Bridgestone RE-01R - 215/45/17 x2 with 90% tread left = $200
B. Bridgestone RE-01R - 245/40/17 x2 with 85% tread left = $250

Package 2: Read for Sale AFTER I get my R888's in
C. Falken RT615 - 225/45/17 x2 with 90% tread left = $200
D. Bridgestone RE-01R - 245/45/17 x 2 with 80% tread left = $200

3. OEM S2K Throttle Body which is in good condition. It comes with both TPS and MAP sensors. In perfect working order. Looking to get $100 obo. Ready for sale. I will ship this item.











4. OEM S2K Rotors. These are brand new never used from Honda. No need to explain anymore than that. Asking $160. I know Hondaautomotiveparts sells them for $87 per rotor, but considering how much shipping is, I think that it is a fair price.







5. Advan RG II's. I'm not quite sure if I want to sell these, but I will if I can get what I want for them. Here are the specs.

Front : 17x7.5 +45 w/ Falken RT615 225/45/17 Tread = 90%
Rear : 17x8.5 +50 w/ Bridgestone RE-01R 245/45/17 Tread = 80%

I would rate 3 of the wheels at 8/10. There are some small paint chips here and there. The stickers aren't perfect on all the wheels either. There is 1 wheel that has a SLIGHT bend in it. It still holds air fine, I'm still driving on them now. The tires that are mounted on there right now aren't the correct ones for the rear. I can swap the 45 series tire with a 40 series tire that I have on my SE37's for $100. I'm asking $1400 with tires or [/B]$1200 without tires[/B]. I'm not really in a rush to sell them, but if you have a reasonable offer, I will consider it. I don't have pictures of each wheel, but if your serious, I will take pictures of all the wheels. Here are a few pictures of them.

Wheel #1 (FRONT #1): This is the one that has the slight bend. As you can see, the wheel still has air in it. It holds air just fine driving around too. I drove it from Fremont to SF and back without any problems. I have driven on them for much longer than that (through 2 sets of front tires. I've owned these wheels for approx. 3 years with the same bend). My car is too low to get a camera under it. Anyway, I'll try to get pics of the bend ASAP, but rest assured, you wont notice the bend unless I point it out to you.







Little nick -


Another small nick -


Here is the picture of the bend, these are all close up pictures. The bend really isn't bad. I still have the wheels on the car and it's still holding all the air:










Wheel #2 (REAR #1):



Larger paint chipping, the most out of all the wheels -




Another small nick -


Wheel #3 (REAR #2):





Small nick (size is less than a dime, just like the other nicks)




Wheel #4 (FRONT #2):



The black stuff is from the pads, it wipes right off -


The ONLY bad sticker on all the wheels:



Other than that, the wheels are pretty good. There is a little gunk on wheel #2, but I think a little elbow grease should do the trick in getting it out.

6. Eibach Coilover Springs

I have a few pairs of springs that I took off from a different set of JRZ's that I had. Here are the following spring rates and prices.

8" Length, 2.5" Diameter, 450lbs Spring Rate = $80 pair (Brand New)
8" Length, 2.5" Diameter, 550lbs Spring Rate = $80 pair (2x pairs, Used)

Spring rates are good for a street driven S2K. They were just too soft for my setup.

----------------------------------------------------------------------------------

Any other questions, just PM me. I'm looking for local buyers on all the big stuff. Rotors and quite heavy and I would think that it wouldn't be worth shipping them anyway. Throttle body is the only thing that I would consider shipping. I'm going to leave this post in the bay area forum until I can't find a buyer for the stuff. Thanks guys! I'll be posting more stuff as I tear the car apart.


HEADED TO EIBACH FRIDAY NIGHT. PLEASE LMK BEFORE THEN IF YOU WOULD LIKE ME TO BRING THEM DOWN WITH ME!!!!