Fender Rolling
Thread Starter
Registered User
Joined: Jun 2002
Posts: 3,053
Likes: 2
From: Miami
Originally Posted by vollrathian,Dec 4 2007, 03:14 PM
dam just get ur fenders trimmed very easy and cheaper
Guys, make sure to call him before and set up an appointment.
Chris
Registered User
Joined: Jul 2005
Posts: 108
Likes: 0
I just wanted to post up my experience with Chris so that everyone knows what to expect. I have a BMW 330Ci, which most of you have seen, and I lowered it with H&R Coilovers, so the back is rubbing when someone sits in the back seat. So this morning I was at the dealership and decided to give Chris a call to see what he can do for me, and he was very cool and asked me to come by in order to figure it out. So I went over there around 3pm and Chris was pretty busy, but asked me to wait a little.
After he got done with the car he was working on, we spoke for a bit and he checked out my car. Upon inspection, he realized that BMW fenders are hard to roll because they aren't designed like any other car, so we had to trim the inside of the fender. He guaranteed me that it would be perfect and the paint won't be affected at all. So I told him that he's the pro, and do what he thinks is best. Let me tell you something, I never thought trimming the fenders could be such a clean job. It looks as if it was stock, and there are no paint defects, not even where he cut. He did such a perfect job and I was completely surprised. He is very attentive to detail, and only does things the right way. He's also a very cool guy, so it made the whole process a lot easier.
So overall, I definitely recommend Chris for fender rolling, or any other work that you may need. Thanks for the reference SC-SUZUKA!!
After he got done with the car he was working on, we spoke for a bit and he checked out my car. Upon inspection, he realized that BMW fenders are hard to roll because they aren't designed like any other car, so we had to trim the inside of the fender. He guaranteed me that it would be perfect and the paint won't be affected at all. So I told him that he's the pro, and do what he thinks is best. Let me tell you something, I never thought trimming the fenders could be such a clean job. It looks as if it was stock, and there are no paint defects, not even where he cut. He did such a perfect job and I was completely surprised. He is very attentive to detail, and only does things the right way. He's also a very cool guy, so it made the whole process a lot easier.
So overall, I definitely recommend Chris for fender rolling, or any other work that you may need. Thanks for the reference SC-SUZUKA!!
Thread Starter
Registered User
Joined: Jun 2002
Posts: 3,053
Likes: 2
From: Miami
Originally Posted by SAIDO,Dec 5 2007, 08:24 PM
I just wanted to post up my experience with Chris so that everyone knows what to expect. I have a BMW 330Ci, which most of you have seen, and I lowered it with H&R Coilovers, so the back is rubbing when someone sits in the back seat. So this morning I was at the dealership and decided to give Chris a call to see what he can do for me, and he was very cool and asked me to come by in order to figure it out. So I went over there around 3pm and Chris was pretty busy, but asked me to wait a little.
After he got done with the car he was working on, we spoke for a bit and he checked out my car. Upon inspection, he realized that BMW fenders are hard to roll because they aren't designed like any other car, so we had to trim the inside of the fender. He guaranteed me that it would be perfect and the paint won't be affected at all. So I told him that he's the pro, and do what he thinks is best. Let me tell you something, I never thought trimming the fenders could be such a clean job. It looks as if it was stock, and there are no paint defects, not even where he cut. He did such a perfect job and I was completely surprised. He is very attentive to detail, and only does things the right way. He's also a very cool guy, so it made the whole process a lot easier.
So overall, I definitely recommend Chris for fender rolling, or any other work that you may need. Thanks for the reference SC-SUZUKA!!
After he got done with the car he was working on, we spoke for a bit and he checked out my car. Upon inspection, he realized that BMW fenders are hard to roll because they aren't designed like any other car, so we had to trim the inside of the fender. He guaranteed me that it would be perfect and the paint won't be affected at all. So I told him that he's the pro, and do what he thinks is best. Let me tell you something, I never thought trimming the fenders could be such a clean job. It looks as if it was stock, and there are no paint defects, not even where he cut. He did such a perfect job and I was completely surprised. He is very attentive to detail, and only does things the right way. He's also a very cool guy, so it made the whole process a lot easier.
So overall, I definitely recommend Chris for fender rolling, or any other work that you may need. Thanks for the reference SC-SUZUKA!!
Chris
Registered User
Joined: May 2006
Posts: 231
Likes: 0
I have a noob question... what r the advantages of getting ur fenders rolled??? My S is a bit more drop then some other guys with S's and when I went to get the car allignment the mechanic couldn't set one of my rear tires up to specs because if not it would of hit the fender....would this rolling of my fender help that problem go away????? or is it just ment to fit bigger rims on cars??