...Project AP1...
Thread Starter
Joined: Mar 2005
Posts: 3,297
Likes: 11
From: V I C E C I T Y
...Project AP1...
Well as many of you know i take alot of pride in building my cars and i dont give a rats ass on spending the loot , nor do i complain about hence "cannot justify the price" BS story. Anyhow i will be posting up a chart on the costs and services of my AP1 build up. So for those of you 10 or more who constantly ask me how much was my wheels or how much was this and how much was that, you can now refer to this thread 
. This chart will include everything from my VeilSide kit to my VOLK wheel locks.
As for the Parts some of them are still on the way and some are pending instalation on the car. I will also be doing a Photoshoot install of all the parts that go on the car so you guys can see how the install is done and or you most probably might see it in upcoming issue's of Tuner Mags and Websites.
So for now i leave you with pics of misc. parts that are sitting in my shop right now and i will be updating this thread freaquently. Enjoy!
BILSTEIN PSS suspension
HKS Hi-Power exhaust system D.I.Y Install
The Car
Stock exhaust
Start by removing the lower stab. bar
Then loosen up where the exhaust meets the cat
Loosen up the hanger aswell
unmount the exhaust, you will need 2 people for this
Parts
Mount the mid pipe of the HKS on the hanger and position flange provided
Bolt up and tighten
install hardware and flange at the end of the mid pipe
Mount the second piece of the HKS insert flange and bolts
tighten up hardware
since i have the VeilSide Ver.1 lip kit i had to more or less check if it would comprimise the rear lip
install hangers on exhaust and mount them, try using some lube to get them in
Now apply flange and hardware to connect the canisters to the rest of the exhaust and tighten
Re-install the factory stab. bar and your done
Final product
Manufactured 8/29/06
. This chart will include everything from my VeilSide kit to my VOLK wheel locks. As for the Parts some of them are still on the way and some are pending instalation on the car. I will also be doing a Photoshoot install of all the parts that go on the car so you guys can see how the install is done and or you most probably might see it in upcoming issue's of Tuner Mags and Websites.
So for now i leave you with pics of misc. parts that are sitting in my shop right now and i will be updating this thread freaquently. Enjoy!
BILSTEIN PSS suspension
HKS Hi-Power exhaust system D.I.Y Install
The Car
Stock exhaust
Start by removing the lower stab. bar
Then loosen up where the exhaust meets the cat
Loosen up the hanger aswell
unmount the exhaust, you will need 2 people for this
Parts
Mount the mid pipe of the HKS on the hanger and position flange provided
Bolt up and tighten
install hardware and flange at the end of the mid pipe
Mount the second piece of the HKS insert flange and bolts
tighten up hardware
since i have the VeilSide Ver.1 lip kit i had to more or less check if it would comprimise the rear lip
install hangers on exhaust and mount them, try using some lube to get them in
Now apply flange and hardware to connect the canisters to the rest of the exhaust and tighten
Re-install the factory stab. bar and your done
Final product
Manufactured 8/29/06
Registered User
Joined: Nov 2003
Posts: 4,849
Likes: 1
From: Caribbean
Originally Posted by GranPrix,Oct 11 2006, 04:26 PM
oh that's right it's going to be a queen like it's owner!!!! 
j/k. I can't wait untill I start buying stuff for my car, well fo rnow I have to pay my bike (I can't just have all the toys) Isn't that the suspenion Alex has? I want it too how much can you get it for Max?
