Jordan's Mods Thread
Alright guys, here is the good old LED dash I created. Basically the same quality of the DJ Qube dash, except it's way cheaper and you don't have to cut as much of your instrument cluster. Dimmer function still works and the pictures just don't do it justice. Basically think of your stock dash in the color of your standard blue LED. The first few pictures of the array exposed give you a good idea of the final color of the numbers. They aren't even remotely white as they appear in the final pictures. And the lines are all clear and concise just same as stock. For those of you that have seen my powdercoated shifter and valve cover. That's a good idea of the color blue that the dash is now. Let me know what you think. I have enough PCB's to make 7 more, although LED's will have to be ordered as needed. My board uses 100 Super Flux Blue LED's, then I modified the stock filter and added an additional filter that I created. :thumbup:
https://i847.photobucket.com/albums/...SNC00253-1.jpg https://i847.photobucket.com/albums/...SNC00254-1.jpg https://i847.photobucket.com/albums/...SNC00255-1.jpg https://i847.photobucket.com/albums/...SNC00256-1.jpg https://i847.photobucket.com/albums/...SNC00257-1.jpg https://i847.photobucket.com/albums/...SNC00259-1.jpg https://i847.photobucket.com/albums/...SNC00260-1.jpg https://i847.photobucket.com/albums/...SNC00261-1.jpg |
:thumbup:
|
Nice! Think I'd like a more white color, but the work and design rock dude!
|
Thanks Matt! I can do white, red, amber, green, blue, and violet and I can do separate sections different colors with a bit more work, I was also thinking I could do a color change with VTEC engagement, now that would cost more, because it would need dual color LED's but it's totally in the realm of possibility. I didn't do it because I thought it'd be too distracting.
|
nice work dude! looks super clean :thumbup:
|
Originally Posted by jordanksartell
(Post 21042650)
Thanks Matt! I can do white, red, amber, green, blue, and violet and I can do separate sections different colors with a bit more work, I was also thinking I could do a color change with VTEC engagement, now that would cost more, because it would need dual color LED's but it's totally in the realm of possibility. I didn't do it because I thought it'd be too distracting.
|
Thanks Jarrod! I think I'm going to work on one for the AP2 next, really it's no different except for the traces and locations of the LED's, I looked at an AP2 dash and AP2's will also use 100 LED's. Hopefully I'll get going on that sometime soon, I think Scott is wanting one for his. If anyone is interested in having one made for them you can just PM me and give me an idea of what color you would want. :tipwink:
|
:thumbup: Looks great man! We'll have to get started on the ap2 cluster when we both have time. I haven't had a chance to call our vender for shocks because work has been hell lately (but should be able to before weeks end).
|
Originally Posted by Th@n@tos
(Post 21042705)
:thumbup: Looks great man! We'll have to get started on the ap2 cluster when we both have time. I haven't had a chance to call our vender for shocks because work has been hell lately (but should be able to before weeks end).
Also guys, be on the lookout for my AP1 LED tail light mod coming soon. I've got some pretty cool ideas to upgrade the AP1 tails. |
This is very very cool
|
Originally Posted by lane_viper
(Post 21042792)
This is very very cool
|
Originally Posted by jordanksartell
(Post 21042799)
Originally Posted by lane_viper' timestamp='1317844759' post='21042792
This is very very cool
|
Are you free at all this evening? Where are you located?
|
Originally Posted by jordanksartell
(Post 21043102)
Are you free at all this evening? Where are you located?
http://maps.google.com/maps?f=q&sour...essee&t=m&z=14 I'll PM you my cell. |
I see a mod in my future
|
Originally Posted by trich101
(Post 21043214)
I see a mod in my future
|
Nice work!
|
Originally Posted by lane_viper
(Post 21043213)
Originally Posted by jordanksartell' timestamp='1317850363' post='21043102
Are you free at all this evening? Where are you located?
http://maps.google.com/maps?f=q&sour...essee&t=m&z=14 I'll PM you my cell. Thats one hell of a commute!! :feint: |
Just sent you a PM Jordan
|
I'll check the PM in a second. I still wish I could get better pics of this....haha it looks so much whiter than it actually is. There is absolutely no trace of white in the dash. It really is right there on the level of quality as the DJ qube dash.
|
I'm going to try taking my video camera out there today and tonight possibly and see if I can pick up the colors better with a video camera. I'll let you guys know how that works out. Coming soon will be the LED taillight mod and Matt and I will be working on under door courtesy lighting that comes on when the doors open and shuts off when they close. :thumbup:
|
req: Arduino mod that turns tach into peak meter while at idle :D
|
Originally Posted by CDjunkie
(Post 21045736)
req: Arduino mod that turns tach into peak meter while at idle :D
|
Looks good dude, would love the see it change to a different when vtec kicks in. Oh and I have some spare ap1 tails if you want them, just want them out of my garage.
|
Different color*
|
Are you willing to gift the tails for the cause? lol
|
Well I just ordered 500 more LED's, 200 Amber, and 300 White to be able to do the taillights. I should have some leftover to do either multiple sets or to do someone else's dash in white. We'll see just how many it'll take to do these taillights though. Either way, I know for a fact, they are going to look awesome!
|
Originally Posted by Clean04ap2
(Post 21045019)
Originally Posted by lane_viper' timestamp='1317852021' post='21043213
[quote name='jordanksartell' timestamp='1317850363' post='21043102']
Are you free at all this evening? Where are you located? http://maps.google.com/maps?f=q&sour...essee&t=m&z=14 I'll PM you my cell. Thats one hell of a commute!! :feint: [/quote] You're telling me. 67miles one way. Hence why we're looking to buy a house in goodlettsville. LOL |
Originally Posted by jordanksartell
(Post 21046218)
Well I just ordered 500 more LED's, 200 Amber, and 300 White to be able to do the taillights. I should have some leftover to do either multiple sets or to do someone else's dash in white. We'll see just how many it'll take to do these taillights though. Either way, I know for a fact, they are going to look awesome!
|
That'd be good Lane. Just shoot me a text, I'm free basically all day.
I have a few ideas guys as to what I want to do with the tail lights. I will be posting up some VERY CRUDE drawings/depictions of my ideas and I think I'll go with whatever everyone likes best. So be looking out for that tonight! :tipwink: |
Any option to do different colors at different RPM's, like at vtec? For example http://www.qube-engineering.com/Purc...Multicolor.jpg
|
Yes, However it will require a custom filter which will cost just a little more than a standard color, but yes, I can make that happen for you buddy.
|
Originally Posted by trich101
(Post 21046328)
Any option to do different colors at different RPM's, like at vtec? For example http://www.qube-engineering.com/Purc...Multicolor.jpg
|
or you could old school it, and just tape some colored transparency to the underside
|
Originally Posted by CDjunkie
(Post 21046404)
or you could old school it, and just tape some colored transparency to the underside
|
Originally Posted by lane_viper
(Post 21046371)
Originally Posted by trich101' timestamp='1317927391' post='21046328
Any option to do different colors at different RPM's, like at vtec? For example http://www.qube-engineering.com/Purc...Multicolor.jpg
|
worked kick ass on my Datsun B-12 :D
...or maybe it was the Pulsar yeah, that was probably it |
Alright, I didn't bother doing mock ups for my other ideas because I think this is the best one and one that everyone will favor the most. So that being said, here is my lame quick mock up as to my idea for an AP1 tail light upgrade. The Right lens would stay the same, except the lighter red ring around the outside would be a ring of LED's that are on with the running lights, same for the red ring around the orange circle (the taillights will still look stock with things off, so it will still have a clear diffuser and won't give away whats really going on inside). The dark red would then illuminate when the brake lights come on. The orange circle with the white dots would be a mix of orange and white LED's. Naturally the orange will light with the turn signals/hazards, and the white will light with the reverse lights. This way regardless of whether it's the turn signal or the reverse lights, the whole circle will light up. I may have to come up with some sort of divider to separate the red ring from the orange and white, because it may get washed out, but that's fairly easy and straightforward to do. Let me know what you guys think! :tipwink:
https://i847.photobucket.com/albums/...l/Untitled.jpg |
I would be interested in doing a cluster in white depending on the price I have always been interested in the cube setup but its just not worth that kind of money to me. Also, I could help you with some better photos of your product as well to show actual color, etc. I think there is a pretty good market for this if you can do it cheap enough.
|
I can do it a lot cheaper than the DJ Qube ones, which is why I did it myself. If you want just a blank white, it would probably be right around 75$ and thats with me modifying your cluster and installing for you. I just need to make it a little worth my time, lol. It's a LOT of work to drill all the holes and solder everything. But PM me if you're serious about wanting one. I think what I'm going to do is for people that want them, I'm going to just charge them for the actual materials up front and then collect the balance upon installation.
|
Originally Posted by jordanksartell
(Post 21046695)
Alright, I didn't bother doing mock ups for my other ideas because I think this is the best one and one that everyone will favor the most. So that being said, here is my lame quick mock up as to my idea for an AP1 tail light upgrade. The Right lens would stay the same, except the lighter red ring around the outside would be a ring of LED's that are on with the running lights, same for the red ring around the orange circle (the taillights will still look stock with things off, so it will still have a clear diffuser and won't give away whats really going on inside). The dark red would then illuminate when the brake lights come on. The orange circle with the white dots would be a mix of orange and white LED's. Naturally the orange will light with the turn signals/hazards, and the white will light with the reverse lights. This way regardless of whether it's the turn signal or the reverse lights, the whole circle will light up. I may have to come up with some sort of divider to separate the red ring from the orange and white, because it may get washed out, but that's fairly easy and straightforward to do. Let me know what you guys think! :tipwink:
https://i847.photobucket.com/albums/...l/Untitled.jpg They may look different in a not so good way. |
Anyone ever thought of doing one of these? It's a UK/JDM AP2 cluster that would work in our AP1's. Kinda cool.
http://cgi.ebay.com/ebaymotors/S2000...item35b098e04f |
Originally Posted by lane_viper
(Post 21048730)
Originally Posted by jordanksartell' timestamp='1317933770' post='21046695
Alright, I didn't bother doing mock ups for my other ideas because I think this is the best one and one that everyone will favor the most. So that being said, here is my lame quick mock up as to my idea for an AP1 tail light upgrade. The Right lens would stay the same, except the lighter red ring around the outside would be a ring of LED's that are on with the running lights, same for the red ring around the orange circle (the taillights will still look stock with things off, so it will still have a clear diffuser and won't give away whats really going on inside). The dark red would then illuminate when the brake lights come on. The orange circle with the white dots would be a mix of orange and white LED's. Naturally the orange will light with the turn signals/hazards, and the white will light with the reverse lights. This way regardless of whether it's the turn signal or the reverse lights, the whole circle will light up. I may have to come up with some sort of divider to separate the red ring from the orange and white, because it may get washed out, but that's fairly easy and straightforward to do. Let me know what you guys think! :tipwink:
https://i847.photobucket.com/albums/...l/Untitled.jpg They may look different in a not so good way. |
I saw the dash in person last night and it was amazing. Even light from side to side. Not the superbright blue, more light the indigo option from Qube, very easy to look at. A definite :thumbup: .
|
Originally Posted by lane_viper
(Post 21048744)
Anyone ever thought of doing one of these? It's a UK/JDM AP2 cluster that would work in our AP1's. Kinda cool.
http://cgi.ebay.com/ebaymotors/S2000...item35b098e04f |
Originally Posted by trich101
(Post 21050511)
Originally Posted by lane_viper' timestamp='1317995799' post='21048744
Anyone ever thought of doing one of these? It's a UK/JDM AP2 cluster that would work in our AP1's. Kinda cool.
http://cgi.ebay.com/ebaymotors/S2000...item35b098e04f |
Well guys, I got one board designed for the AP1 taillight upgrade. This is the board diagram/schematic for the red lens (stop lamp). Now time to get going on the reverse/turn signal board. These are clearly going to be a lot more work than the dash. Just the red lens alone has 92 LED's, just for one side, haha. It's all good though. I like what I'm doing. :thumbup:
https://i847.photobucket.com/albums/...dLensBoard.jpg |
you are nuts dude lol
Can't wait to see the out come!! |
Hahaha, I'm ballparking somewhere around 380 LED's to do a set/pair of taillights. Though I do think they are going to look absolutely AWESOME.....the not so awesome part is that 380 LED's translates to 1520 holes to be hand drilled, and 1520 terminals to be soldered. No sweat though...haha I have no life....
|
ha, :tipwink:
|
Originally Posted by jordanksartell
(Post 21052717)
Well guys, I got one board designed for the AP1 taillight upgrade. This is the board diagram/schematic for the red lens (stop lamp). Now time to get going on the reverse/turn signal board. These are clearly going to be a lot more work than the dash. Just the red lens alone has 92 LED's, just for one side, haha. It's all good though. I like what I'm doing. :thumbup:
https://i847.photobucket.com/albums/...dLensBoard.jpg |
Originally Posted by trich101
(Post 21053103)
Originally Posted by jordanksartell' timestamp='1318124023' post='21052717
Well guys, I got one board designed for the AP1 taillight upgrade. This is the board diagram/schematic for the red lens (stop lamp). Now time to get going on the reverse/turn signal board. These are clearly going to be a lot more work than the dash. Just the red lens alone has 92 LED's, just for one side, haha. It's all good though. I like what I'm doing. :thumbup:
https://i847.photobucket.com/albums/...dLensBoard.jpg Looks good Jordan :thumbup: |
Looks kinda Complicated, but it's really not. Right now I have the ring and inner part sharing a ground which shouldn't be a big deal. And then I have two separate positives. One for the running light ring, and one for the actual brakes. Now as far as the other board is concerned, it's basically done, but after giving more thought, I think I may do away with the second red ring, because I think at night it would look awesome, but during the day if only the middle part of the clear lens lights with the turn signal, I think it may look broken or unfinished. I'm still not positive, the board is basically done for the initial idea, but I'm starting to think this second idea makes the most sense.
|
Originally Posted by jordanksartell
(Post 21052717)
Well guys, I got one board designed for the AP1 taillight upgrade. This is the board diagram/schematic for the red lens (stop lamp). Now time to get going on the reverse/turn signal board. These are clearly going to be a lot more work than the dash. Just the red lens alone has 92 LED's, just for one side, haha. It's all good though. I like what I'm doing. :thumbup:
https://i847.photobucket.com/albums/...dLensBoard.jpg Gonna be awesome dude! You must have a real passion for this kind of stuff.. I have a bachelors in Mechanical Engineering and this makes me :sleep: :sleep: Cant wait to see the results. |
Well I was never really an electrical engineer by trade, but when you're on a submarine you are required to know everyone else's job too, that way if poop hits the fan, someone can still steer the sub home safely. So I don't claim to know EVERYTHING about electrical engineering, and don't have a HUGE passion for it, but I do know a LOT about it and when an idea comes into my head, passion has a way of creeping in as well. :thumbup:
|
lol, yeah i can see where being in a sub... under water... its kinda important to know your shit! :LOL:
I promise you, i know SEVERAL Electrical engineers that would look at your work and :ponder: :ponder: keep up the good work man. looking forward to the results. |
Haha thanks dude. The motivation will definitely come in handy when I start drilling those holes.... :argh:
|
Originally Posted by jordanksartell
(Post 21058661)
Haha thanks dude. The motivation will definitely come in handy when I start drilling those holes.... :argh:
Oh, I contacted the guy about the shocks. I forgot to tell you. I'm still waiting to hear back from him on what he'll do. |
Originally Posted by Th@n@tos
(Post 21059043)
Originally Posted by jordanksartell' timestamp='1318311080' post='21058661
Haha thanks dude. The motivation will definitely come in handy when I start drilling those holes.... :argh:
Oh, I contacted the guy about the shocks. I forgot to tell you. I'm still waiting to hear back from him on what he'll do. |
It would cost more than it's worth to have them custom drilled since they aren't in a normal grid pattern. LED's are arched, and tighter in some places, making it cost more to have them custom drilled. It's just better for me to bite the bullet and do it myself. The only thing I could see making it a little faster is a drill press which I do not have. But oh well!
|
wow love the cluster man.
|
Thanks! Wait till you see it in person, the pictures just don't do it justice....
|
Originally Posted by jordanksartell
(Post 21059616)
It would cost more than it's worth to have them custom drilled since they aren't in a normal grid pattern. LED's are arched, and tighter in some places, making it cost more to have them custom drilled. It's just better for me to bite the bullet and do it myself. The only thing I could see making it a little faster is a drill press which I do not have. But oh well!
|
magnetic drill press? How's that work? :confused:
|
With electricity and metal :confused: :LOL:
|
I'm still confused.... do you mean it mounts magnetically to a workbench or something?
|
Yes, the base of it is an electromagnet. You put it on the metal, flip the switch and you ain't movin' it. It has a handle, just like a drill press, to move up and down.
|
ahhh....makes more sense......only problem.....my workbench is wood..... hahaha.
|
Originally Posted by jordanksartell
(Post 21060317)
ahhh....makes more sense......only problem.....my workbench is wood..... hahaha.
|
I do have a vice....though I usually work over in that shop for semi-major/major car repairs. I've been doing all my LED work out of my apartment....a little more convenient.
|
I'm definitely interested in getting a blue AP2 cluster! The problem is that I'm in Raleigh, NC.
Would it be possible to ship out my cluster to you, get the work done, and simply reinstall it when it gets back? Timeframe would most likely be next month. |
Originally Posted by ofsalesmen
(Post 21062377)
I'm definitely interested in getting a blue AP2 cluster! The problem is that I'm in Raleigh, NC.
Would it be possible to ship out my cluster to you, get the work done, and simply reinstall it when it gets back? Timeframe would most likely be next month. Hey Jordan: My car is down for the next month and I think Chris is wanting to come up there for his cluster, you want me to bring my cluster up there then? |
Yeah that's cool Scott. It really won't take me terribly long to get the AP2 board designed. It will take me all of 30 minutes to take your cluster out of your car (unless you want to bring it to me out already) Then it's just a matter of taking it apart and getting the measurements I need.
ofsalesmen- I could do the install in your cluster for you, provided you ship me your cluster. It will be a little bit before I have the AP2 board designed, but when I do, we can get you taken care of. PM me for pricing details as well as what color(s) you want. |
interesting.
|
You been able to get the AP1 tails apart yet?
|
All times are GMT -8. The time now is 04:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands