Invidia Pipes
Ok, i ordered my invidia test pipe from www.ultrarev.com (bad choice) and it came with no bolts, gasket, anything, just a pipe, that cost me 97 dollars shipped. I just bought the same pipe from this vendor https://www.s2ki.com/forums/index.php?showtopic=411354 and they included test pipe, bolts, gasket, and sticker (woot) for 95 dollars. The 02 simulator is of very high quality, and i would highly recommend getting parts through this vendor. I went ahead and bought the whole set because by itself the 02 simulator is 25 dollars, might as well get some bolts, gasket and new pipe eh?
Here is the dib, i am offering my invidia test pipe for 50 dollars, the guys at the meet saw it at lot 13, and its a very nicely made pipe, no dents, flawless, never installed, i have original box and bag. PLEASE pm me if you want to get this pipe, itsa good deal, your saving 40 bucks with shipping.
Here is the dib, i am offering my invidia test pipe for 50 dollars, the guys at the meet saw it at lot 13, and its a very nicely made pipe, no dents, flawless, never installed, i have original box and bag. PLEASE pm me if you want to get this pipe, itsa good deal, your saving 40 bucks with shipping.
Mr GP, you don't need much. The front end reuses the spring/bolts. The back end can use regular bolts/nuts you can pick up at any hardware store. I have always been able to reuse the stock gaskets with no leaks.
I may have mislead you stating I have been able to reuse stock gaskets. I was talking about dropping the exhaust when doing a clutch not installing a test pipe. I could get into a lot of trouble doing that especially as a shop owner. The fine is not worth the risk. If you have a jack and jackstands it is an easy job. Just spray the bolts with WD and let them soak a few minutes. After that it is just unbolt the cat and bolt in the test pipe.
Trending Topics
Originally Posted by mr_grand_prix,Sep 17 2006, 01:51 PM
could u help me put it on if i take it to ur shop??


