ok so i fixing the exhaust because it was leaking by the converter. theres 3 nuts in a triangle, i manage to unscrew the bottom two with a lot of WD40, but the 3rd 1 up top is rusted so bad that the nuts just kind of go a little bald, didnt want to mess with it so i stop. so can some1 lend me a hand on how to unsrew the nuts so i can replace it with new 1? by the way i live near Sam Houston Race Track

 

get some vice grips

 

tried it but due to limited space and i was on jack stand , they want to charge me 40$ just to take out that 1 nut

 

saw zaw that sucker off

 

LOL i hope not.. shit.

 

 

I work at a dealership off of 45 by splashtown i have lifts here and air tools we can pop that nut right off

 

ever get it done?

 

yup sprayed some more wd40 and let that suker soak up and came right off. now i have another problem new exhaust tips is touching the bumper :/ any suggestion beside cut/re-wield the hanger, which is going to be expensive cuz theres 3 hanger on each side.

 

I would have to see how its hitting to know how to remedy it