Anyone know of a good tuner in DFW? I've read that getting flashpro tuned on the dyno gives better gains that the etune. I have I/H/TP/E and am running the Toda tune right now, which isn't bad, but I'd like to get it custom tuned. Let me know if you know of a good tuner who would be able to help me out! Thanks!

 

Tony at t1, no reason to go anywhere else.

 

For basic bolt-ons like you have, there's really not much benefit for a full dyno tune. You can get 99% of the benefit by just tweaking the fuel and VTEC engagement of the Toda calibration using FlashPro manager and / or the Soft Dyno. Which I/H/TP/E do you have?

 

K&N FIPK, Berk Header, T1R 70mm TP, T1R 70 EM single.. You don't think I really would get much from a full E-Tune either?

 

you'll get a lil bit....

 

Gernby is the flashpro pro!

 

gernby, do you live in DFW? Would you be an option for a tune?

 

I think I replied to this in a PM, but I'm WAY too busy right now to do any tuning. I suggest reading some of the FlashPro tuning threads I created in the Engine Management forum to see if you want to tune it yourself. If you start with the Toda calibration, then adjust fuel and VTEC engagement RPM yourself, you'll be fine.

 

Ahhh,, guess I'm not going to PM you then Gernby. Just received FlashPro this week. Running Toda-tune with Berk 70mm TP and Greddy SE Dual. Night and day difference but wanted to get the most out of what I've got thus far. Was going to make the trip from Houston to see what you could do.

 

Bump! Back from the dead.