S2KI Honda S2000 Forums

S2KI Honda S2000 Forums (https://www.s2ki.com/forums/)
-   UK & Ireland S2000 Community (https://www.s2ki.com/forums/uk-ireland-s2000-community-25/)
-   -   Chao's Moonrock Grey (https://www.s2ki.com/forums/uk-ireland-s2000-community-25/chaos-moonrock-grey-1058153/)

chao888 11-13-2013 02:43 AM

Chao's Moonrock Grey
 
17 Attachment(s)
Hi Everyone

After owning my Moonrock S2K for over 2 years I thought I share my NA project through this thread. Let me start with the car specs

[attachment=48755:263732_10150708715025438_68326543 7_19598822_4348774_n.jpg]

It is a 2007 (57) Moonrock grey Roadster with 25,000 on the clock, after joining the S2KUK community after owning the car for 1 year and kept it standard the bug for tunning begins.

[attachment=48756:photo(2).JPG]

It started with the below:

1. Fibre Glass front lip (Copy of the OEM)

2. Copy of the OEM low level spoiler

Ugrade the wheels to set of 18" Staggered fitment Cades Tyrus wheels
Front 18" 5 x 114.3 ET45 8Js with 225-40-18 tyres
Rear 18" 5 x 114.3 ET45 9Js with 255-35-18 tyres

Love the looks on the wheels but after having it on the car for about 10 months realising it just doesnt drive as nice as the 17" I have rubbing on the rear arches so plan is to switch back to 17" wheels
[attachment=48758:photo(3).JPG]
[attachment=48759:photo(4).JPG]
[attachment=48760:photo(8).JPG]

Next on the list was

1. OEM hardtop
2. Side Strikes

[attachment=48761:549777_10152488648520438_10836613 2_n.jpg]
[attachment=48762:524069_10152782440940438_22978185 _n.jpg]

Next was the engine tunning part where most of the £££ went into

1. K&N FIPK Gen 2 Induction kit
2. Tegiwa Exhaust Manifold (Js REP)
3. Invidia Q300 cat back with Titanium tip finish (From LSD Motors)
4. Berks Decat pipe
5. Hondata Flash Pro ECU (Tune from CPL Racing)
6. Meister R Zeta R coilovers
7. Tegiwa Carbon Fibre cooling plate
8. Kims chrome cross beam plate

Below are tsome pictures from all of the above mods
[attachment=48763:550128_10152226893570438_12714770 7_n.jpg]
[attachment=48764:563976_10152209050960438_18561955 89_n.jpg]
[attachment=48765:photo(29).JPG]
[attachment=48766:44776_10151357181857117_712356465 _n.jpg]
[attachment=48767:529188_10152782440335438_19061108 45_n.jpg]

Here is a dyno sheet from CPL with all of the above mods map to.
[attachment=48768:photo (2).JPG]

Brake up grades was next on the list after the power increase

1. DBA drill and grooved street series disc all round
2. Carbotech XP8 carbon pads for the Front
3. Ferodo DS2500 pads for the rear

[attachment=48769:263496_10152280073595438_11401891 1_n.jpg]
[attachment=48770:295831_10152280073500438_74934840 8_n.jpg]
[attachment=48771:602532_10152287869765438_25566675 _n.jpg]
[attachment=48772:72132_10152287869430438_172953283 _n.jpg]

Since the car was lowered around 30mm I had massive problem with the front copy OEM lip it was just sitting too low and was scrapping everything and everywhere I go so I suffer the blow and order a original genuine facelift lip from Hendy and it was just perfect, the lip was higher and just fits on so much better also to the addition I have sold the 18" and went for a set of 17" Rota Fighters

Front 17" 8j 5 x 114.3 ET44 (215-45-17) Tyres
Rear 17" 9j 5 x 114.3 ET50 (245-40-17) Tyres

chao888 11-13-2013 02:46 AM

4 Attachment(s)
This is how the car looks like at the moment with the new wheels

[attachment=48773:photo(1).JPG]
[attachment=48774:photo(2).JPG]
[attachment=48775:photo.JPG]
[attachment=48776:1383924_10151661837172117_5548963 49_n.jpg]

chao888 11-13-2013 02:49 AM

I have also just purchased a Password JDM induction kit and will update with pictures once fitted on :argh:

SlimJ GBR 11-13-2013 03:18 AM

Liking the look at the moment, saw you post pics up previously! :)

You lowered 30mm? Did you just fit the coilovers, no other parts? I have the same coilovers waiting to go on.

WinFreak 11-13-2013 03:24 AM

Looking good buddy :thumbup:

Joeh 11-13-2013 03:30 AM

https://www.s2ki.com/s2000/public/st...t/thumbsup.gifhttps://www.s2ki.com/s2000/public/st...t/thumbsup.gifhttps://www.s2ki.com/s2000/public/st...t/thumbsup.gif

K3Nguru 11-13-2013 03:51 AM

:thumbup: This project gets my approval :D. The Password:JDM intake will look good in your engine bay. I'd be interested to see a dyno comparison between K&N and PWJDM.

You're a brave man to use K&N oil filter with no filter stopper. :nono:

s2konroids 11-13-2013 04:00 AM

Looks great mate similar to my car lol.

Jonesybubs 11-13-2013 04:01 AM

Looks Good Mate, :thumbup: :thumbup: :thumbup:

robski 11-13-2013 04:34 AM

Looks epic dude, loved it at mimms! Gonna follow your lead on a few mods :D


All times are GMT -8. The time now is 07:27 AM.


© 2024 MH Sub I, LLC dba Internet Brands