in the near future i plan on getting a wide body kit on my S...i wanted to get my wheels first thow...i want 18 x 10 in the rear and 18 x 9.5 or maybe 18 x 9.5 on all four corners....so how bad are these wheels gonna stick out ? anyone have a pic of a similar setup?

 

you posted this in the wrong forum...

but to answer your question, if you have the right offset it should not stick out at all. S2000's require a offset that is not widely available. I have 18x9 OZ's and they do not stick out at all.

 

That's 18x10" Work Meister S1's with 265/35/18 tires. Stock fenders. No rubbing, running on stock suspension.

 

I've got a set of HRE445, 10" rear, +64 offset, 8.5 front, +58 offset, 265x35 & 225x40, stock height, nearly flush with the wheel wheels, no problems...could only guess what the offsets would be for a wide body....

 

thanks guys

 

if u think your going to do a widebody, don't get your wheels first, otherwise if the wheels look flush before the kit, the will look sunken in after the widebody conversion, trust me

 

I got 18x10's iForged running 285's w/a +73 off-set, no rubbing, no trimming, stock fenders.

 

well cant you just change your offsets and you'll be fine?