Car has coilovers, so height can be changed. Currently car has about 1 finger gap all around with 225/50/16 and 245/45/16 tires. Any advice on how to fit the rears? Roll, pull, relocate and trim? And probably about 3 degrees of camber?

Looking to see pictures of rear setup and tire sizes.

Thanks.

 

With that wide of a wheel and the needed wider tire and the lower offset I can see a wide body or pulling the fenders out to make it work.

 

Run 195/30-17 tires?

 

If you want any functionality at all you need overfenders.

 

Well after chatting with a memeber, it appears it takes more work than expected. I'll stick to something more feasible.

 

good plan

 

definitely made the ride choice. i dont think its worth all that trouble to make it fit.

 

hey wisdom, my new wheel and tire setup is a lot more fender friendly from the old 17x9/10 +35 setup. im going with 17x9 +45 w/ 255/40/17 and im gonna raise the car up a little bit to be track friendly. do a basic fender roll on all corners. i won't have any pictures soon as the wheels are still in the process of japan making them.