So this is whats up.
I want a good looking wheel with the ability to fit as wide tires as possible without rubbing (with modest fender mods). I'm looking to roll and relocate bumper tab but definitly no flaring!

I was thinking that the volk ce28n competition specs looks quite good but I havent been able to find any pictures of how they look. Anyone got any?

thx

 

I have the 17x10 +70 rears, they fit 275s quite well. The 17x8.5 +58s fit 235s well.



I have 17x9 +63 fronts with 255s. I did not need to to anything to make these work, but a slight roll when I get my coilovers and lower some.

 

Thanks! Do you have any more pics? (from different angles)

So no fender mods in the back to get the 275's to work? Not even with a drop?
I'm just worried that I'll want something more agressive in the rear when I get them installed.

Yeah I'll probably try and go with 275 in the back and 255 in the front then.

 

On stock ride height, I didn't need to do anything. When I drop it I will probably need to roll a little on the fronts, I'll let you know when I get my coilovers in a couple weeks. If you want more aggressive you can always add spacers and do fender modifications (depending on the spacer). Here's a better side profile

 

Thanks again man! I might have to copy your setup then I think ^^ Looks great!!

 

Good man! Function over form.

 

nah nah...function AND form

 

Hey man, just wanted to bump this and see if there were any updates on your fitment with your new coilovers and which coilovers are you running? I'm looking to use the same wheel setup as you so I'm curious what suspension I can run. Thanks!

 

5 year old thread is 5 years old.

 

Try his build thread: https://www.s2ki.com/forums/automoti...1113847/page6/