I am looking at the SSR Type-C wheels for my 03 S2K. The size i was look at for the front is 17x7.5 +49 and rear 17x8.5 +58. I would be using a 215 tire in the front and a 255 or 265 tire in the rear. I am going to be putting on tein flex coilvers and lowering the car 1 inch front and rear. I am not sure if they are going to fit without rubbing howerever and was just wondering if you guys could help me out. Thanks

 

depends on how low you wanna go. camber and roll the tabs. you should be ok

 

I just wanted to lower the car an inch front and rear. And i'm going to sound stupid but does roll the tabs mean lol

 

I also was wondering if these OZ's would fit without any rubbing or not???

http://www.tirerack.com/wheels/WheelCloseU...=All&sort=Brand

 

with those offsets you'll be fine, no need to roll anything

 

Ok the recomended wheel sizes are 205 front adn 225 rear. Is that the sizes i want to use or no?

 

^215 and 245 tire widths would be more appropriate on that size wheel.

 

Ok. Thanks man

 

That is the default Tirerack recommendation since you have an AP1 and those are stock widths. I'd either do 215/45 or 225/45 front with a 255/40 rear.

 

I have 07 ap2 with ssr type-c i decided to got with 18x9 just because the rims are concave not like the 17' no offense but they look like rotas to me , my specs are 18x9, offset are +55 all around tires are bridgestone potenza re 760 sport fits perfect tire size is 255/35/18 , and oh yes you will need some fender rolling ..