S2KI Honda S2000 Forums
I feel a lot better about this now.
I feel a lot better about this now.
0 2021/01/18 07:08:29
A new coupler and a little bit more tweaking and I finally have enough room so the turbo cold side doesnt touch the frame
A new coupler and a little bit more tweaking and I finally have enough room so the turbo cold side doesnt touch the frame
0 2021/01/18 07:07:40
the best part is: i was able to use factory threaded hole to mount the dampener.
the best part is: i was able to use factory threaded hole to mount the dampener.
0 2021/01/18 07:06:37
my favorite angle of the engine bay
my favorite angle of the engine bay
0 2021/01/18 07:06:13
super HD close up of the bracket at the turbo
super HD close up of the bracket at the turbo
0 2021/01/18 07:05:31
simple! yet effective
simple! yet effective
0 2021/01/18 07:04:56
As my fellow sidewinder turbo manifold owners can attest. they vibrate and buzz and its annoying. I came up with a clever way to deal with it that is flexible, applies continuous pressure, and is easily replaceable. I am using a hood dampener and an engine torque brace. The Vband clamp is temporary, i'll have someone weld in a tab for it to attach to soon.
As my fellow sidewinder turbo manifold owners can attest. they vibrate and buzz and its annoying. I came up with a clever way to deal with it that is flexible, applies continuous pressure, and is easily replaceable. I am using a hood dampener and an engine torque brace. The Vband clamp is temporary, i'll have someone weld in a tab for it to attach to soon.
0 2021/01/18 07:02:34
a closer look
a closer look
0 2021/01/18 07:01:18
Who remembers when I started this project. ONLY 10 freaking years ago. so many delays! But its FINALLY DONE! Spoon/Shine hardtop with a working hinge system.
Who remembers when I started this project. ONLY 10 freaking years ago. so many delays! But its FINALLY DONE! Spoon/Shine hardtop with a working hinge system.
0 2021/01/18 07:00:13
I dont get tired of looking at it lol
I dont get tired of looking at it lol
0 2021/01/18 06:59:24
its great to have this car back on the road
its great to have this car back on the road
0 2021/01/18 06:58:49
Its great to have this car back on the road!
Its great to have this car back on the road!
0 2021/01/18 06:58:23
So fresh! So clean! And now with more clearance! I took the car for a test drive and wow! so much quieter now. I Cant wait to get the exhaust tweaked a little and then it will be only clutch buzz and turbo noises. LOL. I hope everyone had a great thanksgiving with Family! I spent mine doing this.
So fresh! So clean! And now with more clearance! I took the car for a test drive and wow! so much quieter now. I Cant wait to get the exhaust tweaked a little and then it will be only clutch buzz and turbo noises. LOL. I hope everyone had a great thanksgiving with Family! I spent mine doing this.
0 2020/11/27 05:19:15
Remember the foam blocks over the fender? I did that because this area was PACKED full of rocks. This is after vacuuming it, so nasty.
Remember the foam blocks over the fender? I did that because this area was PACKED full of rocks. This is after vacuuming it, so nasty.
0 2020/11/27 05:18:00
Thankfully, the damage was only cosmetic, I had to pull the compressor cover off and the fans out. Turns out the SPAL fans were not allowing enough clearance for the turbo to be clocked in the right spot. So, it modified the fan shroud for more clearance. Sorry no pics of that..
Thankfully, the damage was only cosmetic, I had to pull the compressor cover off and the fans out. Turns out the SPAL fans were not allowing enough clearance for the turbo to be clocked in the right spot. So, it modified the fan shroud for more clearance. Sorry no pics of that..
0 2020/11/27 05:16:30
I'd say this is a little too close for comfort.. LOL
I'd say this is a little too close for comfort.. LOL
0 2020/11/27 05:15:44
all done! it starts much better now and damn i missed having this car. Can't wait to drive it this weekend!
all done! it starts much better now and damn i missed having this car. Can't wait to drive it this weekend!
0 2020/11/25 13:03:05
While I had the fender off, i installed foam to block all the tiny rocks from collecting on the frame rail. Gravel next to the turbo inlet is disturbing. lol
While I had the fender off, i installed foam to block all the tiny rocks from collecting on the frame rail. Gravel next to the turbo inlet is disturbing. lol
0 2020/11/25 13:02:06
Success!!
Success!!
0 2020/11/25 13:01:39
I had a mini battery kit for my EVO 9. lets make this work...
I had a mini battery kit for my EVO 9. lets make this work...
0 2020/11/25 13:00:47
I had a small racing battery in the trunk, but I suppose the long wiring had too much resistance and the car would have a slow start. So, its time to move the battery to the front.
I had a small racing battery in the trunk, but I suppose the long wiring had too much resistance and the car would have a slow start. So, its time to move the battery to the front.
0 2020/11/25 12:58:48
Back in the garage! But of course I have been mulling over so many ideas while its been gone...its time for it to go under the knife again.
Back in the garage! But of course I have been mulling over so many ideas while its been gone...its time for it to go under the knife again.
0 2020/11/25 12:57:48
finally tucked away in the RaceHouse garage. Geeezz is anyone counting how many years its been? Please dont. lol
finally tucked away in the RaceHouse garage. Geeezz is anyone counting how many years its been? Please dont. lol
0 2020/11/25 12:57:07
The S2Kaiju looks great on a trailer! Sadly, Greyson's s2000 had some fuel delivery issues and had to stay at InlinePro.
The S2Kaiju looks great on a trailer! Sadly, Greyson's s2000 had some fuel delivery issues and had to stay at InlinePro.
0 2020/11/25 12:56:08
lol Im kicking myself for not closing the hood for this shot. I missed seeing this car.
lol Im kicking myself for not closing the hood for this shot. I missed seeing this car.
0 2020/11/25 12:55:22
InLinePro's master tech is doing some final tweaks after a little street tuning on Greyson's S2000.
InLinePro's master tech is doing some final tweaks after a little street tuning on Greyson's S2000.
0 2020/11/25 12:54:23
InlinePro is impressive! so many amazing cars!!
InlinePro is impressive! so many amazing cars!!
0 2020/11/25 12:53:39
A tail of two turbo s2000s
A tail of two turbo s2000s
0 2020/11/25 12:53:07
Finally back in the Grage
Finally back in the Grage
0 2020/11/25 12:51:29
here is a sneak peek under the hood! the car is all together and running. InlinePRO is working out some o2 senor and boost issues. it looks like its maxing out at 14 psi and should be doing 18. So they are checking into I and i'll know more soon! its almost time!!!
here is a sneak peek under the hood! the car is all together and running. InlinePRO is working out some o2 senor and boost issues. it looks like its maxing out at 14 psi and should be doing 18. So they are checking into I and i'll know more soon! its almost time!!!
0 2020/06/02 13:08:02
Here is a little update. InlinePRO finished building engine #3? i dont even know anymore. LOl
Here is a little update. InlinePRO finished building engine #3? i dont even know anymore. LOl
0 2020/06/01 07:58:46
money shot!! installed a NeoChrome Flip up steering hub and a matching shift knob! Also! Got a working RaceDash to talk with the Xbox for live RPM, MPH, and race data.
money shot!! installed a NeoChrome Flip up steering hub and a matching shift knob! Also! Got a working RaceDash to talk with the Xbox for live RPM, MPH, and race data.
0 2020/06/01 07:29:32
Im really happy with this!!
Im really happy with this!!
0 2020/06/01 07:28:59
BAM!!!
BAM!!!
0 2020/06/01 07:28:36
i can make this work. i know it.
i can make this work. i know it.
0 2020/06/01 07:27:56
texting and driving is bad mmmmkay. i have an idea.
texting and driving is bad mmmmkay. i have an idea.
0 2020/06/01 07:27:22
But it worked none the less!
But it worked none the less!
0 2020/06/01 07:26:39
the metal was super hard, so i had to superheat the shaft with a blow torch to thread it. it only worked so so
the metal was super hard, so i had to superheat the shaft with a blow torch to thread it. it only worked so so
0 2020/06/01 07:25:52
but first! I want a real shift knob, So i dremmeled down the shifter shaft to the correct thickness so i could thread it for a real shift knob.
but first! I want a real shift knob, So i dremmeled down the shifter shaft to the correct thickness so i could thread it for a real shift knob.
0 2020/06/01 07:24:36
i have an idea...
i have an idea...
0 2020/06/01 07:23:53