Mark this thread as Sold
f24c for sale
Thread Starter
Registered User
Joined: Nov 2009
Posts: 658
Likes: 1
From: United States
f24c for sale
I have a f24c, tranny, AEM EMS, ap1 wiring harness, for sale.
I will sell these parts individually, but will not piece the motor apart ie; taking crankshaft out,cams, etc
Head-
Stock head except brian crower stage 3 exhaust cam (part #bc0062)
Block-
K24 crank 99mm with bevelled lip milled
H22 connecting rods
*H22 pistons 87mm
*Cylinder walls need bored or resleeved
*The head is taken apart (valves & springs remain
*All the pistons have cracked ring lands and need to be replaced.Majestic sells them for $49.95.
*Cylinder walls if im correct can be bored no more then .025mm. Majecstic sells oversized pistons (87.25mm)
Transmission is in excellent condition and shifts very smooth!!, You will need a new shifter, and shift knob because a custom bracket was built in order to fit the s13. Has brand new OEM honda transmission fluid in it. I do have AEM fuel pressure regulator and rc 750's that were just serviced and used 1 time before i had engine failure. I have a stock intake manifold with throttle body. It does have the AEM MAF or MAP sensor (im not sure), which will be sold with the AEM
AEM EMS PLUG-n-PLAY for AP1 S2000 (10-951) Thats the only number i can see on the EMS, If anybody knows where another serial number would be let me know and i will find it for you
Im sure im missing something so let me know if you have any questions.
About the prices, i dont really know what most of this is worth, so if the price is crazy, please dont scream at me about it just let me know whats reasonable.
This motor is the ORIGINAL F24c stroker from Design Craft Frabrication, it is a absolute beast of a motor. This motor was done right, with everything to exact specs.
Here are the prices, once again please dont slam me if there outrageous, and please dont try and rip me off either
Head-$1300 obo
Block-$1200obo
Transmission-$900-$1200 w/ lightweight flywheel act stage 3 clutch (has been driven on 4-5 times) Needs new throw out bearing
AEM EMS-$800-Shipped
I am located in Las Vegas, and welcome anyone wanting to come take a look and/or pick the parts up they would like.
As far as shipping, i dont know how much all of it would cost, so i will get a quote for someone if they'd like. Thanks for looking!
I will sell these parts individually, but will not piece the motor apart ie; taking crankshaft out,cams, etc
Head-
Stock head except brian crower stage 3 exhaust cam (part #bc0062)
Block-
K24 crank 99mm with bevelled lip milled
H22 connecting rods
*H22 pistons 87mm
*Cylinder walls need bored or resleeved
*The head is taken apart (valves & springs remain
*All the pistons have cracked ring lands and need to be replaced.Majestic sells them for $49.95.
*Cylinder walls if im correct can be bored no more then .025mm. Majecstic sells oversized pistons (87.25mm)
Transmission is in excellent condition and shifts very smooth!!, You will need a new shifter, and shift knob because a custom bracket was built in order to fit the s13. Has brand new OEM honda transmission fluid in it. I do have AEM fuel pressure regulator and rc 750's that were just serviced and used 1 time before i had engine failure. I have a stock intake manifold with throttle body. It does have the AEM MAF or MAP sensor (im not sure), which will be sold with the AEM
AEM EMS PLUG-n-PLAY for AP1 S2000 (10-951) Thats the only number i can see on the EMS, If anybody knows where another serial number would be let me know and i will find it for you
Im sure im missing something so let me know if you have any questions.
About the prices, i dont really know what most of this is worth, so if the price is crazy, please dont scream at me about it just let me know whats reasonable.
This motor is the ORIGINAL F24c stroker from Design Craft Frabrication, it is a absolute beast of a motor. This motor was done right, with everything to exact specs.
Here are the prices, once again please dont slam me if there outrageous, and please dont try and rip me off either
Head-$1300 obo
Block-$1200obo
Transmission-$900-$1200 w/ lightweight flywheel act stage 3 clutch (has been driven on 4-5 times) Needs new throw out bearing
AEM EMS-$800-Shipped
I am located in Las Vegas, and welcome anyone wanting to come take a look and/or pick the parts up they would like.
As far as shipping, i dont know how much all of it would cost, so i will get a quote for someone if they'd like. Thanks for looking!
Former Moderator
Joined: Sep 2002
Posts: 45,374
Likes: 429
From: Mother F'in TN
Thread
Thread Starter
Forum
Replies
Last Post
RedLineS2k10
Archived Member S2000 Classifieds and For Sale
13
Nov 2, 2010 03:34 PM