UPDATE ON BOTTOM OF FIRST POST~~

Hey everyone, alot of you may know of Gladman Performance because he's recently joined the website as a sponsor and has been producing great products at GREAT prices.
So far the products which have received plenty of attention have been;
Rear Aluminum Diffuser
Aluminum Cooling Plate
and his Strut bar with Integrated heat shield

First of i want to thank Jordan for joining the site and making such great products that all of us can afford unlike many of the "JDM" priced things.

Any suggestions you guys have please comment them and i will post it up

We have had a couple thoughts floating around about what should be the next product. I know he is already working on the 'side diffusers' for the back bumper that will finish the design of the rear diffuser and he has also been doing alot of work on the on a front splitter which will extend to the rear diffuser making a full body aluminum diffuser.

First and for most i think many of us agree that completing the full body diffuser has priority since he has already started working on it.

The next two on the list are side skirts, or full covering Fuse Box covers, which would cover the entire battery/brake cylinder area as apposed to only part of it like the Arc or Alloy Craft one does.

He will be determining which one to invest his time producing based on peoples choice.

I for one would like to see the full fuse box cover as its something that has not been produced yet and at his previous pricing is something many of us can afford and would look absolutely great in the engine bay.

So my vote goes to the fuse box cover for the next product.




Here we go! Update! The products are out! The Group Buy has begun!!!

Im pleased to announce that Jordan has already started a new group buy for the diffuser!! Many have been waiting in this nows your chance!

Also the first section of the covers are now availible, this group buy is over soon and for those who want to see the fuse box side to come out as well should go ahead and invest now on the first half because it will speed up the process...

Here is the link for the group buy on the diffuser.
https://www.s2ki.com/s2000/index.php...t&pid=20995825

And here is the link for the Reservoir / BMC Covers!
https://www.s2ki.com/s2000/index.php...t&pid=20952495

 

Thanks for posting the thread, I will be watching.

 

fuse box covers ftw! and please, i hope he doesnt stop producing the rear diffusers, it may be a few months until im ready to buy one, but im working on it

 

I have no plans to stop anything, I would like to develop a whole offering a performance parts for the S chassis.

 

Here are a couple pictures to get the idea's flowing. These are really rough prototype panels, they don't have any mounting points, I just wanted to start getting some reference for mounting and coverage. Let me know what you think. I may not do much more until some kind of a group buy is layed out, but we'll see. I will do a bit more tinkering. I also have to find out how the BMC side will work with later model AP2's with the fly by wire throttle body.

I would also prefer to keep the stock heat shield on the exhaust side, this will keep the price on the heat shield waaayyy down and will make installation super simple. My panel would either fit tight into the OEM shield with tabs or require a couple holes to attach it.

I forgot to put my thottle cable over the strut tower bar the last time I pulled it off, but the cruise control cable would run through the slot in the front of the panel.





This would be the battery side, this side would have louvers, and is missing the flange to close up the front. The battery is going to have a small cover with thumb screws to hold it in place.



I would sell separately in the $75 + shipping range, $125-$140 for both. Group buy pricing lower than that by 20-30%.

 

Those look nice. Id like to see a super strong, low profile X brace that doesnt rust and doesnt cost a fortune.

 

i rather have you cover the battery...and the reason i suggest going with a new head shield to replace oem one is because you could make a lip in it where you could attach the top to the side one with hex bolts, so if we need to charge the battery we can take the top peice off, but i think one of the reason people will like the battery cover is because it will cover the entire battery...

To be honest i know thats why me and MrKlean braught it up so urgently because no one was willing to do some extra fabbing....

 

how about that full under tray! where is that option!

 

I plan on doing a full undertray for my car this weekend, pics coming

 

I would love to have a cover for the driver side of the engine bay. I don't really want a fuse box cover since I have my nitrous window switch and stuff mounted over there, but I would definetly buy a cover for the driver side to cover the ugly master cylinder and some of my nitrous lines/wires.